AVSPARE.COM
parts catalog

COUPLING AS 3236161 - Caterpillar



3236161 COUPLING AS Caterpillar parts COUPLING
Rating:
86
Alternative (cross code) number:
CA3236161
323-6161
3236161
Caterpillar 3236161 COUPLING AS
Weight: 0.30 pounds 0 kg.

Buy COUPLING AS 3236161 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register

Information:


Illustration 1 g06089405
(1) 491-1472 Cutter Bit As or 491-1503 Cutter Bit As
(2) 3E-9411 Hard Washer
(3) 7X-0448 Nut
(4) Stud
(5) 263-7082 Block
(6) Base blockNote: Washer (2), nut (3) and stud (4) are included with cutter bit (1).
Illustration 2 g06089486
View of tooling
(7) Hydraulic pump as
(8) Press as
(9) Bit adapter
Illustration 3 g06089497
View of tooling
(8) Press as
(9) Bit adapter
(10) Diamond bit
(11) Tool holder blockThe new bits shall be installed with a new hydraulic press system. See referenced special instruction for further details. The press provides a consistent and high level of seating force. The high seating force, combined with the improvements to diamond bit shank compliance will result in the highest level of contact at the shank / bore interface. This will provide improved load distribution through the interface and improve service life of the tool holder blocks.Note: Hammering the bits into place is not recommended as this can loosen bits already installed and can provide inconsistent seating of the bit.The hydraulic press assembly and operating instructions are provided in Special Instruction , M0071388 , "Assembly Instructions For The Diamond Bit And Carbide Tool Holder Installer Tool".
Table 1
Required Parts
Item Qty Part Number Part Description Tip Size
1 1 491-1472 Cutter Bit As .540 Tip
2 1 491-1503 Cutter Bit As .625 Tip
Table 2
Sales Model Adaptable To: Effective In Production With:
PM-102 S/N:Z2X1-602 S/N:Z2X603-UP
PM-200 S/N:P1C1-623
S/N:P1C632
S/N:P1M1-324 S/N:P1C624-631
S/N:P1C633-UP
S/N:P1M325-UP
PM-201 S/N:PNM1-295 S/N:PNM296-UP
PM-620 S/N:JB91-100
S/N:LH91-100 S/N:JB9101-UP
S/N:LH9101-UP
PM-622 S/N:JFC1-100
S/N:JCF1-100 S/N:JFC101-UP
S/N:JCF101-UP


Parts coupling Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.