AVSPARE.COM
parts catalog

COUPLING AS- 3236181 - Caterpillar



3236181 COUPLING AS- Caterpillar parts COUPLING
Rating:
46
Alternative (cross code) number:
CA3236181
323-6181
3236181
Caterpillar 3236181 COUPLING AS-
Weight: 0.25 pounds 0 kg.

Buy COUPLING AS- 3236181 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register

Information:


Improper lifting or tie-downs can allow load to shift and cause injury and damage.
Illustration 1 g06134542Refer to Operation and Maintenance Manual, "Conveyor Locks", before lifting the machine to properly lock the conveyor.For the specifications of the machine, refer to Operation and Maintenance Manual, "Specifications".For specifications of any work tools, refer to the Operation and Maintenance Manual for the specific work tool.
Lifting Mass - The lifting mass indicates the maximum weight of the machine without any work tools.
Lifting Point - To lift the machine, attach the lifting devices to the lifting points.
Tie Down Point - To tie down the machine, attach the tie-downs to the tie down points.Lifting the Machine
Illustration 2 g06082342Use properly rated cables and properly rated slings to lift the machine.Position the crane or the lifting device to lift the machine in a level position.
Move the machine into position.
Move the propel lever to the neutral position, and make sure that the parking brake indicator is illuminated.Note: The parking brake is automatically applied when the machine is stopped and the propel lever is in the neutral position.
Turn the engine start switch key to the OFF position. Remove the key.
Attach lifting cables to the lifting eyes. The lifting eyes are identified on the machine by labels. There are two lifting eyes on each side of the machine.
Lift the machine slowly to make sure that the machine stays level. Move the machine to the desired position.Tying Down the Machine
Illustration 3 g06082372
Top view of tie down points.
Move the machine into position.
Move the propel lever to the neutral position, and make sure that the parking brake indicator is illuminated.Note: The parking brake is automatically applied when the machine is stopped and the propel lever is in the neutral position.
Turn the engine start switch key to the OFF position. Remove the key.
Chock the tracks.
Use the tie-down positions to secure the machine. The tie-down positions are identified on the machine by labels. There are two tie-down positions on each side of the machine.Refer to Operation and Maintenance Manual, "Shipping the Machine" for shipping instructions.


Parts coupling Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.