AVSPARE.COM
parts catalog

COUPLING AS- 3236182 - Caterpillar



3236182 COUPLING AS- Caterpillar parts COUPLING
Rating:
51
Alternative (cross code) number:
CA3236182
323-6182
3236182
Caterpillar 3236182 COUPLING AS-
Weight: 0.29 pounds 0 kg.

Buy COUPLING AS- 3236182 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register

Information:

Connection Procedure
Personal injury or death can result from machine articulation or movement.Machine frames can move and a person can be crushed.Connect the steering frame lock link between the front and rear frames before working on machine. Secure clevis pin with locking pin.Before operating the machine, fasten the steering frame lock link into the stored position and secure the clevis pin with locking pin.Failure to lock into the stored position before operating can result in loss of steering.
Failure to follow the instruction below for the installation of the steering frame lock pin may result in personal injury. Special care must be taken if more than one person is installing the steering frame lock pin.Confirm the verbal communication and the hand signals that will be used during the installation.Be alert for the sudden movement of the machine frames or the steering frame lock pin.Do not insert fingers into the steering frame lock bores when the bores are being aligned.Do not hold the pin in the steering frame lock bores when the bores are being aligned.Do not stand within 1 m (3.28 ft) of the machine while the steering control is moved to align the steering lock bores.
Move the machine to a hard, level surface. Park the machine in the straight ahead position and engage the parking brake.
Stop the engine.
Illustration 1 g06277423
Remove locking pin (2) and pin (1).
Illustration 2 g06082473
Machine frames can move and the steering frame lock pin can be expelled if the steering frame lock pin is only partially installed, or the pin bevel is in contact with the upper edge of the steering frame lock link.Personal injury can result from machine articulation or movement.Ensure that the steering frame lock pin is installed through the machine frame bore before moving the steering control.
Move the steering frame lock link (3) in position to front frame.
Check that the bores in steering frame lock link (3) and the front frame are aligned.
Install pin (1), ensure pin (1) passes through the bore.
Install pin (1) and locking pin (2).Separation Procedure
Personal injury or death can result from machine articulation or movement.Machine frames can move and a person can be crushed.Connect the steering frame lock link between the front and rear frames before working on machine. Secure clevis pin with locking pin.Before operating the machine, fasten the steering frame lock link into the stored position and secure the clevis pin with locking pin.Failure to lock into the stored position before operating can result in loss of steering.
Illustration 3 g06082473
Illustration 4 g06082469
Machine frames can move and the steering frame lock pin can be expelled if the steering frame lock pin is only partially installed or the pin bevel is in contact with the upper edge of the steering frame lock link.Personal injury can result from machine articulation or movement.Ensure that the engine is stopped before removing the steering frame lock pin.
Remove locking pin (2) and pin (1).
Move steering frame lock link (3) to the stored position. Install pin (1) and locking pin (2).
Install pin (2) and retaining pin (4)


Parts coupling Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.