AVSPARE.COM
parts catalog

COUPLING AS- 3236201 - Caterpillar



3236201 COUPLING AS- Caterpillar parts COUPLING
Rating:
46
Alternative (cross code) number:
CA3236201
323-6201
3236201
Caterpillar 3236201 COUPLING AS-
Weight: 0.25 pounds 0 kg.

Buy COUPLING AS- 3236201 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register

Information:


Illustration 1 g06058930
Tractor Operator Stations
(1) Operator display
(2) Compaction screen iconThe operator controls for the tamper system are programmed in the software. Access to the controls is through operator display (1) on the tractor control stations (shown) and screed control stations.Compaction screen icon (2) is selected on the operator display (1) to access the tamper settings. The tamper settings entered in the operator display are stored in the screed ECM. The parameter data is monitored and communicated by the transmission ECM and the machine ECM to the screed ECM via CAN lines.Note: When the operator switches from one tractor control station to the other station, tamper settings are maintained.
Illustration 2 g06057770
Operator Displays
(3) Tamper switch
(4) Tamper speed indicator
(5) Tamper mode indicator
(6) Settings icon
(7) Compaction screen
(8) Compaction settings screen
(9) Tamper screen
(10) Auto speed screen
(11) Increase rate screen
(12) OK iconCompaction screen (7) provides current compaction information and access to settings. The compaction screen includes the following tamper-related features:
Tamper switch (3)
Tamper speed indicator (4)
Tamper mode indicator (5)
Settings icon (6)Tamper switch (3) enables and disables the tamper system. When the switch is tapped, the tamper icon changes color and moves left or right. The left position is the OFF position with the icon color gray. The right position is the ON position with the icon color green (shown). The default position is OFF.Note: Tamper icon (3) is only visible when a tamper is installed on the screed.Tamper speed indicator (4) shows the speed of the tamper system. The units displayed depend on the tamper mode. When in auto mode, the indicator reads tamper bar rate in tamps per distance. When in manual mode, the indicator reads tamper motor speed in rpm.Tamper mode indicator (5) indicates the mode of the tamper. The


Parts coupling Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.