AVSPARE.COM
parts catalog

COUPLING AS- 3236223 - Caterpillar



3236223 COUPLING AS- Caterpillar parts COUPLING
Rating:
21
Alternative (cross code) number:
CA3236223
323-6223
3236223
Caterpillar 3236223 COUPLING AS-
Weight: 0.35 pounds 0 kg.

Buy COUPLING AS- 3236223 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register

Information:


Illustration 7 g06058101
Screed-assist Pressure Adjust
(33) Screed icon
(34) Settings icon
(35) Operator screen
(36) Screed screen
(37) Settings screen
(38) Screed-assist screen
(39) OK iconThe screed-assist system is programmed with pressure logic. When screed-assist mode is requested and operation parameters are met, preset pressure acts on the raise or lower section of the screed lift cylinders.The operator can use the display to modify screed-assist pressure for the"UP","STANDBY UP", or"DOWN" assist pressure values. The pressure is displayed in kilo pascals or pounds per square inch. Machine pressure units depend on the display units chosen. The assist pressure is operator adjustable from 100 kPa (15 psi) to 5000 kPa (725 psi).Note: Screed-assist pressure can be modified on the display at either machine operator station and on the display at either screed control stations. For more information on how to modify screed-assist pressure at the screed control stations, refer to screed documentation.To change the status of the screed-assist pressure, tap screed icon (33) on operator screen (35). Next, tap settings icon (34) on screed screen (36) to access settings screen (37). Tap the"Assist" bar to access screed-assist screen (38). To modify the desired pressure, tap the plus or minus arrow on the corresponding adjustment bar. The text color changes from white to yellow when the new values are pending. OK icon (39) must be tapped to accept and save the changed value. The text color returns to white when the new values are accepted.Note: The up and down arrows on the right side of the screen allow the operator to highlight available options in the body of the screen.
Illustration 8 g06057836
Screed-assist Timer Adjust
(35) Operator screen
(39) OK icon
(40) Machine icon
(41) Machine screen
(42) Settings screen
(43) Timers screen
(44) Screed assist screenThe screed-assist system is programmed with timer logic. When the requirements of the assist mode are met, a preset delay timer acts on the raise or lower section of the screed lift cylinders. Timer delay settings depend on the assist mode requested.The operator can use the display to modify screed-assist timers for the"Standby Start","Standby Stop","Lower Lock", and"Halt" modes. The assist mode timers are operator adjustable from zero to 10 seconds. The default time is 2 seconds for"Standby Stop","Lower Lock", and"Halt". The default timer setting for the"Standby Start" is zero seconds.Note: Screed-assist timers can be modified on the display at either machine operator station and on the display at either screed control station. For more information on how to modify screed-assist timers at the screed control stations, refer to screed documentation.The"Standby Start" timer sets the delay between when the machine stops active paving and the activation of the screed-assist standby paving mode. The"Standby Stop" timer sets the delay between when the machine starts to move and the deactivation of the screed-assist standby paving mode.The"Lower Lock" timer sets the delay between when the machine starts to move and the deactivation of the screed lower lock mode. The"Halt" timer sets the delay between when the machine starts to move and the deactivation of the screed halt mode.To change the status of a screed-assist timer, tap


Parts coupling Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.