parts catalog

COUPLING AS- 3236238 - Caterpillar

3236238 COUPLING AS- Caterpillar parts COUPLING
Alternative (cross code) number:
Caterpillar 3236238 COUPLING AS-
Weight: 0.30 pounds 0 kg.

Buy COUPLING AS- 3236238 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register


Hot oil and hot components can cause personal injury. Do not allow hot oil or hot components to contact skin.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products.Dispose of all fluids according to local regulations and mandates.
The service brakes should only require purging after disassembly of the brake system components.If service has been carried out on the service brakes on the trailer, only the lines for these brakes should need purging.Note: Always purge the lines for the brake accumulator before attempting to purge the lines for the brakes. The purge screws are on the check and pressure reducing valve.
Illustration 1 g06084010
Top view of the service brake purge fittings
(1) Bleeder Screw
Attach lengths of clear tubing to bleeder screws (1) for bleeding the brake on the appropriate brake. Fix the free ends into a suitable container.
Move the transmission control to the NEUTRAL position and move the parking brake control to the ENGAGED position. Start the engine and operate the engine at low idle.
Open bleeder screws (1) to purge the brakes. Have an assistant slowly and carefully press the service brake pedal until air and/or oil is discharged from the tubes.Slowly press the brake pedal to connect the lines for the accumulator to the lines for the brakes. Oil will slowly flow into the lines for the brakes and the oil will force any air out of the lines.
When the oil flows free of air, close the fittings for bleeding the brakes and release the brake pedal.
Check the hydraulic oil level. Refer to Operation and Maintenance Manual.
Wipe up any spilled oil. Dispose of used oil and oil soaked rags according to local environmental regulations.Normally, if the lines between the service brake control valve and the brakes have been disturbed, one brake application will be enough to purge the air from the system.If the lines between the accumulator and the service brake control valve have been disturbed, more than one brake application may be required to complete the purging of air from the system.

Parts coupling Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.