COUPLING GP-PUMP 3396855 - Caterpillar

Illustration 1 g03399436
Table 1
Specification for 354-0798 Tilt Cylinder Gp
Item Qty Part Specification Description
1 1 6E-1364 Bushing Bore before assembly is 160.210 0.025 mm (6.3075 0.0010 inch).
Installation depth is 10.0 0.5 mm (0.39 0.02 inch).
2 1 3G-5022 Locknut Before assembly, lubricate the threads.
Torque to 18000 1800 N m (13276 1328 lb ft).
3 1 374-4658 Bushing Bore before assembly is 140.34 0.02 mm (5.525 0.001 inch).
Installation depth is 10.0 0.5 mm (0.39 0.02 inch).
B 1 367-4139 Tilt Cylinder As Bore is 266.75 0.08 mm (10.502 0.003 inch).
C 1 367-4136 Rod As Diameter is 139.650 0.038 mm (5.4980 0.0015 inch).
D 1 367-4142 Head Bore over two lands is 139.98 0.03 mm (5.511 0.001 inch).
4 2 147-0169 Bolt Torque to 3100 350 N m (2286 258 lb ft).
5 8 101-3672 Bolt Torque to 3100 350 N m (2286 258 lb ft).
6 1 354-0723 Buffer Seal As Lubricate the sealing lip of the buffer seal lightly with the fluid that is being sealed.
7 1 374-9651 U-Cup Seal Lubricate the sealing lip of the u-cup seal lightly with the fluid that is being sealed.
8 1 354-0725 Wiper Seal Lubricate the sealing lip of the wiper seal lightly with the fluid that is being sealed.
9 1 - Before assembly, apply green Loctite Retaining Compound 620 to the wiper seal groove.