COUPLING-EXH-YM 3699490 - Caterpillar

Improper lifting and improper tie-downs can allow the load to shift or fail and cause injury or damage. Use only properly rated cables and slings with lift and tie down points provided.Follow the instructions in Operation and Maintenance Manual, "Lifting and Tying Down the Machine" for the proper technique for securing the machine. Refer to Operation and Maintenance Manual, "Specifications" for specific weight information.
Illustration 1 g01519807
Improper lifting or tiedowns can allow load to shift and can cause injury and damage.
Note: Do not use handles or steps in order to lift or tie down the machine.Reference: Refer to the Operation and Maintenance Manual, "Specifications" for the approximate shipping weights.Note: The shipping weight that is listed is the weight of the most common configuration of the machine. If attachments have been installed on your machine, the weight of your machine and the center of gravity of your machine may vary.The instructions that are listed below describe units that are manufactured by Caterpillar Inc..
Engage the parking brake.
Use properly rated cables and properly rated slings for lifting. For a machine with a blade, position the slings beneath the front of the track and beneath the rear of the track. Also for a machine without a blade, position the slings beneath the front of the track and beneath the rear of the track. For a machine with a ripper, raise the ripper to the upper position, and position the slings beneath the front of the track and beneath the ripper.
On sharp corners, use corner protectors. The crane should be positioned so that the machine may be lifted in a level plane. The spreader bars should be wide enough to prevent contact with the machine.
There are specific locations for tying down the machine. Front tie-down - Use the eye of the front tie-down.Side tie-downs - Use the inside edge of the track shoe.Rear tie-downs - Use the rear boss. Use the outer edge of the track shoe.Check the state laws that govern the following load characteristics.
Weight
Width
Length
HeightCheck the local laws that govern the following load characteristics.
Weight
Width
Length
HeightConsult your Caterpillar dealer for shipping instructions for your machine.