AVSPARE.COM
parts catalog

COUPLING AS-AIR CONDITIONER 3905010 - Caterpillar



3905010 COUPLING AS-AIR CONDITIONER Caterpillar parts 924K, 930K, 938K COUPLING
Rating:
8
Alternative (cross code) number:
CA3905010
390-5010
3905010
Caterpillar 3905010 COUPLING AS-AIR CONDITIONER

Buy COUPLING AS-AIR CONDITIONER 3905010 Caterpillar genuine, new aftermarket tractor parts with delivery
WHEEL LOADER,

Compatible equipment models: 3905010:

WHEEL LOADER  924K   930K   938K   Caterpillar
  For full view, you need register

Information:


Lower the temperature of sleeve bearing (21). Install the sleeve bearing in the clutch housing assembly. Install the seal ring in the clutch housing assembly.
Install the three reaction dowels in the clutch housing assembly.
Illustration 16 g00509041
Install two guide pins (22) in the inner impeller. Attach a hoist to clutch housing assembly (23). Place clutch housing assembly (23) in position on the torque converter. Ensure that the reaction dowels in clutch housing assembly (23) go through the clutch piston and go into the impeller.
Install the twelve bolts and the washers that hold the clutch housing assembly to the impeller. Tighten the bolts to a torque of 120 15 N m (90 11 lb ft).
Install the bolts and the washers that hold the clutch housing assembly to the rotating housing. Tighten the bolts to a torque of 50 7 N m (37 5 lb ft).
Illustration 17 g00509042
Heat ring carrier (24) to a maximum temperature of 135°C (275°F). Install ring carrier (24) on carrier assembly (25). Install the pin that fastens the ring carrier to the carrier assembly.
Illustration 18 g00509067
Install the lower retaining ring on carrier assembly (25) .
Install two seal rings (26) on carrier assembly (25). Install carrier assembly (25) in the torque converter.
Illustration 19 g00509070
Install the plate and retaining ring (27) .
Illustration 20 g00509072
Use Tooling (A) to install the lip seal in bearing carrier (28). The lip of the seal should be facing the inside of the bearing carrier. The edge of the seal should make contact with the counterbore in the bearing carrier.
Illustration 21 g00509075
Install bearing (30) and wear ring (29) in the bearing carrier.
Illustration 22 g00509076
Install ring (32) in ring carrier (31). Install ring carrier (31) in bearing carrier (28) .
Illustration 23 g00509080
Use a press to install shaft (33) in bearing carrier (28). The shoulder on shaft (33) should make contact with ring carrier (31) .
Illustration 24 g00509082
Install O-ring seal (34) and O-ring seal (35) in the bearing carrier.
Illustration 25 g00509126
Install the shaft and the bearing carrier in the torque converter. Install the six bolts and the washers that attach the bearing carrier to the torque converter.
Illustration 26 g00509128
Install two O-ring seals (37) on the carrier assembly.
Install yoke (36), the retainer, and the bolt onto the end of the shaft. Tighten the bolt to a torque of 120 15 N m (90 11 lb ft).
Illustration 27 g00509130
Attach a hoist to torque converter cover (38). Place torque converter cover (38) in position on the torque converter. Install the eleven bolts and the washers that hold the cover in place.End By: Install the torque converter. Refer to Disassembly and Assembly , "Torque Converter - Install" for the machine that is being serviced.


Parts coupling Caterpillar catalog:

1532994 COUPLING
216, 216B, 216B3, 226B, 226B3, 228, 232B, 236, 236B, 236B3, 236D, 242B, 242B3, 242D, 246C, 246D, 247, 2470C, 247B, 247B3, 248, 252B, 252B3, 256C, 2570C, 257B, 257B3, 257D, 259B3, 259D, 262C, 262C2, 26...
1532995 COUPLING
216, 216B, 216B3, 226B, 226B3, 228, 232B, 236, 236B, 236B3, 236D, 242B, 242B3, 242D, 246C, 246D, 247, 247B, 247B3, 248, 252B, 252B3, 256C, 257B, 257B3, 257D, 259B3, 259D, 262C, 262C2, 262D, 267, 267B,...
8S7169 COUPLING
10 FT, 10-20B, 215, 215D, 225, 225D, 227, 229, 229D, 231D, 235, 235C, 245, 245B, 24H, 3116, 325B L, 325C, 325D L, 330B L, 330C, 330D L, 336D L, 3406E, 345B II, 345B L, 345C L, 365B, 365B II, 365C, 365...
1773489 COUPLING AS
924K, 930K, 938K, 950G II, 950H, 962G II, 962H, 966G II, 966H, 966K, 966M, 966M XE, 972G II, 972H, 972K, 972M, 972M XE, 980G II, 980H, 980K, 980M, 982M, 986H
1782716 COUPLING
924K, 930K, 938K, 950G II
2211583 COUPLING
725, 725C, 730, 730C, 735, 735B, 740, 740B, 924K, 930K, 938K, D11T
3738459 COUPLING-SHAFT
924K, 930K, 938K, 993K
1669266 COUPLING
924K, 930K, 938K
1669266 COUPLING
924K, 930K, 938K
3738459 COUPLING-SHAFT
924K, 930K, 938K, 993K
2211583 COUPLING
725, 725C, 730, 730C, 735, 735B, 740, 740B, 924K, 930K, 938K, D11T
1782716 COUPLING
924K, 930K, 938K, 950G II
9X3888 COUPLING
140G, 657B, 793, 994, D11R
9X3894 COUPLING
140G, 24H, 657B, 773B, 773D, 775B, 793, 994, D10N
1540097 COUPLING-PERMANENT
140M, 651E, 777F, D11R, MH3049, MH3059
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.