COUPLING ASSEM. 3D8757 - Caterpillar

Prepare the machine for maintenance.Refer to Operation and Maintenance Manual, "System Pressure Release".Refer to Operation and Maintenance Manual, "Use of Wheel Chocks".Refer to Operation and Maintenance Manual, "Cable (Truck Body Retaining)".Refer to Operation and Maintenance Manual, "Hoist, Torque Converter and Brake Tank Oil - Change" for the correct draining and filling procedure.
Illustration 1 g03682702
View of the rear of the torque converter housing (A) Lockup clutch (B) Elbow assembly (C) Hose assembly
Remove and discard elbow assembly (B) and hose assembly (C) .
Illustration 2 g03682796
View of the rear of the torque converter housing (A) Lockup clutch (1) 1U-3176 Connector (2) 238-5080 O-Ring Seal (3) 9X-2085 Elbow (4) 214-7568 O-Ring Seal (5) 228-7090 O-Ring Seal (6) 444-3702 Hose As
Secure connector (1) with O-ring seal (2) to lockup clutch (A) .
Secure elbow (3) with O-ring seal (4) to connector (1) .Note: Lockup clutch (A) may require removal in order to achieve proper clearance to install elbow (3) .
Secure hose assembly (6) with O-ring seal (5) to elbow (3). Secure the other end of hose assembly (6) to the available elbow assembly for the lines group.Instructions for the 793D
Table 3
Required Parts
793D    
Item     Qty     Part     Description    
1     1     1U-3176     Connector    
2     1     238-5080     O-Ring Seal    
3     1     8T-6876     Elbow    
4     1     228-7090     O-Ring Seal    
5     1     214-7568     O-Ring Seal    
6     1     455-6780     Hose As    
Prepare the machine for maintenance.Refer to Operation and Maintenance Manual, "System Pressure Release".Refer to Operation and Maintenance Manual, "Use of Wheel Chocks".Refer to Operation and Maintenance Manual, "Cable (Truck Body Retaining)".Refer to Operation and Maintenance Manual, "Hoist, Torque Converter and Brake Tank Oil - Change" for the correct draining and filling procedure.
Illustration 3 g03682722
View of the rear of the torque converter housing (A) Lockup clutch (B) Elbow assembly (C) Hose assembly
Remove and discard elbow assembly (B) and hose assembly (C) .
Illustration 4 g03682852
(A) Lockup clutch (1) 1U-3176 Connector (2) 238-5080 O-Ring Seal (3) 8T-6876 Elbow (4) 228-7090 O-Ring Seal (5) 214-7568 O-Ring Seal (6) 455-6780 Hose As
Secure connector (1) with O-ring seal (2) to lockup clutch (A) .
Secure elbow (3) with O-ring seal (4) to connector (1) .Note: Lockup clutch (A) may require removal order to achieve proper clearance to install elbow (3) .
Secure hose assembly (6) with O-ring seal (5) to elbow (3). Secure the other end of hose assembly (6) to the available elbow assembly for the lines group.