COUPLING 4C5093 - Caterpillar

Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A - Loctite C5-A - Start By:
Remove the rear drive shaft.
Remove the rear tires and rims.
Remove the front crankcase guard.
Illustration 1 g01152514
Disconnect tube assembly (1). Repeat for the opposite side.
Illustration 2 g01152518
Attach a suitable lifting device to rear axle (2). The weight of rear axle (2) is approximately 3856 kg (8500 lb).
Illustration 3 g02139147
Remove bolts (3). Repeat for the opposite side.
Illustration 4 g01152572
Remove bolts (4). Repeat for the opposite side. Remove rear axle (2).Installation Procedure
Install rear axle (2) in the reverse order of removal.
Apply Tooling (A) to the frame dowel bores.
Tighten bolts (3) and (4) to a torque of 2000 250 N m (1475 184 lb ft).