COUPLING 5L6897 - Caterpillar

Parts and Specification Information
Illustration 1 g03848871Note: Verify that all parts are shipped and undamaged for preparation of assembly. Missing or damaged parts can be ordered prior to assembly to avoid delays during assembly.
Personal injury or death can occur from heavy components falling during removal or installation.Properly support the component with a suitable lifting device during removal or installation.
Climbing equipment may be required to access this service point. Refer to the Operation and Maintenance Manual, "Mounting and Dismounting" topic for safety information.
Table 1
Item Part Number Description Qty Specification Approximate Weight
1 442-2741 Ladder As 2 36 kg (80 lb)
2 4L-6454 Bolt 20
3 8T-4896 Hard Washer 20
4 2K-4973 Locknut 8
5 442-2763 Bracket 2
6 442-2769 Bracket 2
7 9X-2121 Screw 4
8 442-2767 Lanyard 4
9 442-2762 Pin 4
10 442-2755 Ladder As 2
11 8T-8919 Bolt 8
12 5P-1076 Hard Washer 16
13 1K-6872 Locknut 8
14 442-2760 Ladder As 2
15 442-2764 Handle As 2
16 5C-6266 Bolt 8
17 7X-0515 Hard Washer 8 Installation Procedure
Illustration 2 g03848904
A view of the right ladder assembly
Use a suitable lifting device to install ladder assembly (1) to the frame using six bolts (2) and six hard washers (3).
Install bracket (5) and bracket (6) using four bolts (2), four hard washers (3), and four locknuts (4).
Install two screws (7), two lanyards (8), and two pins (9) to ladder assembly (1).
Install ladder assembly (10) to ladder assembly (1) using two bolts (11), four hard washers (12), and two locknuts (13).
Install ladder assembly (14) to ladder assembly (10) using two bolts (11), four hard washers (12), and two locknuts (13).
Illustration 3 g03849111
A view of the handle on the right side of the frame by the engine
Install handle assembly (15) using four bolts (16) and four hard washers (17).
Repeat Steps 1 through 6 for the left side of the machine.