COUPLING-SEALING 5P3929 - Caterpillar

Removal Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Disconnect the negative battery terminal at the battery.
Illustration 1 g01261060
Loosen allen head screw (1). Disconnect harness assembly (2) from electronic control module (3).
Disconnect hose assembly (9).
Remove bolts (4) and washers (8) and (5). Remove isolation mounts (6) and spacers (7) from electronic control module (3).
Remove electronic control module (3). Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 2 g01261060
Position electronic control module (3).
Install electronic control module (3) on isolation mounts (6) and spacers (7). Install washers (5) and (8) and bolts (4). Tighten bolts (4) to a torque of 28 7 N m (21 5 lb ft).
Connect hose assembly (9).
Connect harness assembly (2) to electronic control module (3). Position the cover and tighten allen head screw (1).
Connect the negative battery terminal at the battery.