6V9960 COUPLING ASSEM. Caterpillar parts
330B L, 345B L, 950G II, 980F, D6M, D6R, D6R II, D6R III
Rating:
Alternative (cross code) number:
CA6V9960
6V-9960
6V9960
CA6V9960
6V-9960
6V9960
Weight: 1 pounds 0 kg.
EXCAVATOR, WHEEL LOADER,
Compatible equipment models: 6V9960:
Number on catalog scheme:
35
For full view, you need register
Information:
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 123-4370 Stud Puller 3
6V-7742 Full Nut 3
B 138-7574 Link Bracket 1
C 143-5455 Lifting Bracket 1
189-0411 Shackle As 1
D 1P-0074 Slide Hammer Puller Gp 1
E 1P-0520 Driver Gp 1 Start By:
Remove the outer axle shafts. Refer to Disassembly and Assembly, "Axle Shaft - Remove".
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Drain the oil from the final drive into a suitable container for storage or disposal. Refer to Operation and Maintenance, "Final Drive Oil - Change".
Illustration 1 g00978910
Remove bolts (1). Block sprocket segment (2) with suitable cribbing.
Illustration 2 g00978911
Install Tooling (A). Remove bolts (3). Slide final drive planetary carrier (4) to the end of Tooling (A).
Illustration 3 g00978912
Attach Tooling (B) and a suitable lifting device to final drive planetary carrier (4). Apply tension.
Remove the nuts from Tooling (A) and remove final drive planetary carrier (4). The weight of final drive planetary carrier (4) is approximately 100 kg (220 lb). Remove the O-ring seal from final drive planetary carrier (4).
Illustration 4 g00978913
Remove bolts (5) and retainer (6).
Illustration 5 g00978914
Use Tooling (C) in order to remove ring gear (7). The weight of ring gear (7) is approximately 41 kg (90 lb).
Illustration 6 g00978915
Use Tooling (D) (not shown) in order to remove bearing (8).
Illustration 7 g00978916
Use Tooling (D) (not shown) in order to remove seal (9). Installation Procedure
Illustration 8 g00978916
Use Tooling (E) (not shown) in order to install seal (9).
Illustration 9 g00978915
Use Tooling (E) (not shown) in order to install bearing (8).
Install final drive planetary carrier (4) in the reverse order of removal. End By:
Install the outer axle shafts. Refer to Disassembly and Assembly, "Axle Shaft - Remove".
Table 1
Required Tools
Tool Part Number Part Description Qty
A 123-4370 Stud Puller 3
6V-7742 Full Nut 3
B 138-7574 Link Bracket 1
C 143-5455 Lifting Bracket 1
189-0411 Shackle As 1
D 1P-0074 Slide Hammer Puller Gp 1
E 1P-0520 Driver Gp 1 Start By:
Remove the outer axle shafts. Refer to Disassembly and Assembly, "Axle Shaft - Remove".
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Drain the oil from the final drive into a suitable container for storage or disposal. Refer to Operation and Maintenance, "Final Drive Oil - Change".
Illustration 1 g00978910
Remove bolts (1). Block sprocket segment (2) with suitable cribbing.
Illustration 2 g00978911
Install Tooling (A). Remove bolts (3). Slide final drive planetary carrier (4) to the end of Tooling (A).
Illustration 3 g00978912
Attach Tooling (B) and a suitable lifting device to final drive planetary carrier (4). Apply tension.
Remove the nuts from Tooling (A) and remove final drive planetary carrier (4). The weight of final drive planetary carrier (4) is approximately 100 kg (220 lb). Remove the O-ring seal from final drive planetary carrier (4).
Illustration 4 g00978913
Remove bolts (5) and retainer (6).
Illustration 5 g00978914
Use Tooling (C) in order to remove ring gear (7). The weight of ring gear (7) is approximately 41 kg (90 lb).
Illustration 6 g00978915
Use Tooling (D) (not shown) in order to remove bearing (8).
Illustration 7 g00978916
Use Tooling (D) (not shown) in order to remove seal (9). Installation Procedure
Illustration 8 g00978916
Use Tooling (E) (not shown) in order to install seal (9).
Illustration 9 g00978915
Use Tooling (E) (not shown) in order to install bearing (8).
Install final drive planetary carrier (4) in the reverse order of removal. End By:
Install the outer axle shafts. Refer to Disassembly and Assembly, "Axle Shaft - Remove".
Caterpillar parts catalog:
Parts coupling Caterpillar catalog:
16M, 215D, 229D, 231D, 235C, 235D, 245B, 245D, 24M, 5110B, 5130, 5230, 583T, 587T, 621B, 627B, 637D, 69D, 769C, 769D, 771C, 771D, 773B, 773D, 773E, 773F, 775B, 775D, 775E, 775F, 776C, 776D, 777, 777B,...
135H, 135H NA, 143H, 14H, 14H NA, 160H ES, 160H NA, 163H NA, 16M, 215D, 229D, 231D, 235C, 235D, 245B, 245D, 24M, 5110B, 5130, 5130B, 517, 5230, 5230B, 527, 583T, 587T, 621B, 627B, 637D, 773F, 775F, 77...
135H, 135H NA, 143H, 14H, 14H NA, 160H ES, 160H NA, 163H NA, 16M, 215D, 229D, 231D, 235C, 235D, 245B, 245D, 24M, 5110B, 5130, 5130B, 517, 5230, 5230B, 527, 583T, 587T, 621B, 627B, 637D, 773F, 775F, 77...
16M, 215D, 229D, 231D, 235C, 235D, 245B, 245D, 24M, 5110B, 5130, 5230, 583T, 587T, 621B, 627B, 637D, 69D, 768C, 769C, 769D, 771C, 771D, 772B, 773B, 773D, 773E, 773F, 775B, 775D, 775E, 775F, 776C, 776D...
572R, 572R II, 578, 583R, 587R, 587T, 589, D10N, D10R, D11N, D11R, D11T, D6H, D6H XL, D6H XR, D6R, D6R II, D7H, D7R, D7R II, D8L, D9L, D9R
330, 330B, 330B L, 527, 950B, 950B/950E, D4H, D4H XL, D4HTSK III, D5H, D5H XL, D5HTSK II, E240, W330B
517, 527, 561M, 561N, 613C, 613C II, 613G, 936, 936F, 950B, 950B/950E, 966C, D4H XL, D4HTSK III, D5H, D5H XL, D5HTSK II, D5M, D5N, D6M, D6N, G936
D6H, D6H XL, D6H XR, D6R
966D, 966F, 966F II, D6H, D6H XL, D6H XR, D6R, D6R II
527, 950B, 950B/950E, 950F, 950F II, 950G, 950G II, 950H, 950K, 960F, 962G, 962G II, 962H, 962K, 966C, 966H, 966K, 966M, 966R, D5R LGP, D6N, D6N LGP, D6N OEM, IT62G, IT62G II, IT62H, R1300, R1300G, R1...
572R II, 583T, D10N, D10R, D10T, D10T2, D6R, D6R III, D6R STD, D6T, D6T LGP, D6T LGPPAT, D6T XL, D7R II, D7R XR, D8T, D9T, PL83, PL87
583T, 587R, 587T, 972H, 972K, 980F, 980F II, 980G, 980G II, 980H, 980K, 980M, D7R XR, D8N, D8R, D8R II, D8T, PL83, PL87
69D, 936, 936F, 950F, 950G, 950G II, 960F, 962G, 966F, 966G, 966G II, 966H, 972G II, 980F, 980H, AD30, AD55, D6H, D6H II, D6H XR
350, 916, 918F, 924F, 938G, 966G, 966G II, 980G, 980G II, D5H, D7R II, IT18B, R1300
320B L, 330B L, 350, 69D, 916, 918F, 926, 938F, 938G, 950G II, 966G, 980G, 980G II, D250E, D5H, D5M, D5N, D6H, D7H, D8L, IT18B, IT28B, M325B
6V9952
COUPLING ASSEM.
926, 936F, 950G II, D5H, D6H, D6M, D6N, IT28B
926, 936F, 950G II, D5H, D6H, D6M, D6N, IT28B
6V9947
COUPLING ASSEM.
320, 320B FM LL, 330, 330B L, 345B L, 918F, 924F, 938F, 938G, 950F, 950G, 950G II, 950H, 962G, 966F, 966G, 966G II, 966H, 980F, 980G, 980G II, 980H, D5H, D5N, D6H, D6N, D6R, D7R II
320, 320B FM LL, 330, 330B L, 345B L, 918F, 924F, 938F, 938G, 950F, 950G, 950G II, 950H, 962G, 966F, 966G, 966G II, 966H, 980F, 980G, 980G II, 980H, D5H, D5N, D6H, D6N, D6R, D7R II
350, D6H, D6R
8T7097
COUPLING ASSEM.
350, D6H, D6R
350, D6H, D6R
115, 325B L, 330B L, 350, 916, 918F, 924F, 936, 936F, 938F, 938G, 938G II, 950F, 950G, 950G II, 962G, 966G, 966G II, 980F, 980G, 980G II, D11R, D6R, D7E, D7E LGP, D7H, D7R, D7R II, IT18B, R1300
69D, 793F CMD, 797F, 916, 918F, 924F, 926, 936, 936F, 938F, 938G, 938G II, 950F, 950G, 950G II, 950H, 962G, 963, 966F, 966G, 966G II, 966H, 972G II, 980F, 980G, 980G II, 980H, AD30, D300E, D5M, D8L, D...
6V9948
COUPLING ASSEM.
330, 938F, 938G, 950F, 950G, 962G, 966F, 980F, 980G, D5M, IT18B, IT28B
330, 938F, 938G, 950F, 950G, 962G, 966F, 980F, 980G, D5M, IT18B, IT28B