7Y1899 COUPLING AS Caterpillar parts
320 L
Rating:
Alternative (cross code) number:
CA7Y1899
7Y-1899
7Y1899
CA7Y1899
7Y-1899
7Y1899
Weight: 11 pounds 5 kg.
EXCAVATOR,
Compatible equipment models: 7Y1899:
Number on catalog scheme:
4
For full view, you need register
Information:
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A FT-2730 Hook 12 Start By:
Remove the rocker arm and the shaft. Refer to Disassembly and Assembly, "Rocker Arm and Shaft - Remove".
Remove the front cover. Refer to Disassembly and Assembly, "Front Cover - Remove".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Use Tooling (A) to reposition the valve lifters out of the way of the camshaft.
Set the No. 1 piston to top center on the compression stroke. Refer to Testing and Adjusting, "Finding Top Center Position for No. 1 Piston".
Illustration 1 g01032348
Ensure that the timing marks on camshaft gear (1) and idler gear (2) are aligned.
Remove bolts (3) and thrust plate (4) from the cylinder block.
Illustration 2 g01032349
Do not damage the lobes or the bearings when the camshaft is removed or installed.
Remove camshaft (5) from the cylinder block.
Table 1
Required Tools
Tool Part Number Part Description Qty
A FT-2730 Hook 12 Start By:
Remove the rocker arm and the shaft. Refer to Disassembly and Assembly, "Rocker Arm and Shaft - Remove".
Remove the front cover. Refer to Disassembly and Assembly, "Front Cover - Remove".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Use Tooling (A) to reposition the valve lifters out of the way of the camshaft.
Set the No. 1 piston to top center on the compression stroke. Refer to Testing and Adjusting, "Finding Top Center Position for No. 1 Piston".
Illustration 1 g01032348
Ensure that the timing marks on camshaft gear (1) and idler gear (2) are aligned.
Remove bolts (3) and thrust plate (4) from the cylinder block.
Illustration 2 g01032349
Do not damage the lobes or the bearings when the camshaft is removed or installed.
Remove camshaft (5) from the cylinder block.
Caterpillar parts catalog:
Parts coupling Caterpillar catalog:
7Y1584
COUPLING GP-PUMP
320 L
320 L
120M, 120M 2, 307, 308E CR, 308E SR, 311D LRR, 312, 312B L, 312C, 312C L, 312D, 312D L, 312D2, 312D2 GC, 312E, 313D2, 314C, 315, 315B L, 315C, 315D L, 316E L, 317, 317B LN, 318B, 318C, 318D2 L, 319C, ...
316E L, 320, 320 L, 320N, 325, 325 L, 325 LN, 330, 330 FM L, 330 L, 3512C, 3516C, 422E, 428E, 432E, 434E, 442E, 444E, 539, 770G, 770G OEM, 772G, 772G OEM, 793F, 793F AC, 793F CMD, 793F OEM, 793F-XQ, 7...
227, 2384C, 2484C, 307B, 312, 312B L, 312C, 315B L, 315C, 317B LN, 318B, 318C, 320 L, 3208, 322, 322 LN, 3306, 3406, 3406B, 3406C, 3408, 3412, 3456, 3508, 3508B, 3512, 3512B, 3512C, 3516, 3516B, 3516C...
307, 307B, 312, 312B L, 312C, 315, 315B L, 315C, 317, 317B LN, 318B, 318C, 320 L, 322 LN, 325 L, 330 L, 345B II, 350
5I3178
COUPLING AS
307, 307B, 311, 311B, 312, 312B, 315, 315B FM L, 317, 320 L, 320B, 320B FM LL, 320N
307, 307B, 311, 311B, 312, 312B, 315, 315B FM L, 317, 320 L, 320B, 320B FM LL, 320N
7Y1907
COUPLING AS
320 L
320 L
2757258
COUPLING
320C
320C
2757257
COUPLING
320C
320C
2757256
COUPLING
320C
320C
2616038
COUPLING
320C
320C
2615983
COUPLING
320C
320C
2615982
COUPLING
320C
320C
9W4693
COUPLING
517, D4HTSK II, D4HTSK III
517, D4HTSK II, D4HTSK III
8R8460
COUPLING
826C
826C
1206878
COUPLING
D7R II
D7R II
1Q3283
COUPLING AS
D10R, D9R
D10R, D9R
0875200
COUPLING
320 L
320 L
7I7677
COUPLING AS
320, 320N
320, 320N