8K3289 COUPLING Caterpillar parts
225, 227, 229, 229D, 235, 235B, 235C, 235D
Rating:
Alternative (cross code) number:
CA8K3289
8K-3289
8K3289
CA8K3289
8K-3289
8K3289
Weight: 2 pounds 0 kg.
EXCAVATOR, LOGGER,
Compatible equipment models: 8K3289:
Number on catalog scheme:
24
For full view, you need register
Information:
Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
E 249-2937(1) Seal Locator As 1
5P-7310(1) Bolt 3
9S-8858(1) Nut (Seal Installer) 1
6V-6143(1) Seal Installer 1
5P-1733(2) Seal Locator As 1
5P-7309(2) Bolt 3
9S-8858(2) Nut (Seal Installer) 1
6V-6142(2) Seal Installer 1
F(3) 5P-7301 Seal Locator 1
5P-7309 Bolt 2
9S-8858 Nut (Seal Installer) 1
8T-2683 Rear Seal Installer 1
(1) Large pilot for crankshaft gear (approximately 85 mm (3.3 inch) diameter)
(2) Small pilot for crankshaft gear (approximately 52 mm (2.0 inch) diameter)
(3) For use when the rear gear group is installed.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01513824
Clean the outside diameter of the crankshaft.Note: Install the crankshaft rear seal with the arrow that shows the direction of crankshaft rotation toward the rear of the engine.
Use Tooling (E) to install crankshaft wear sleeve (2) and crankshaft rear seal (1) as a unit.Note: Use Tooling (F) when the rear gear group is installed.End By:
Install the flywheel. Refer to Disassembly and Assembly, "Flywheel - Remove and Install".
Table 1
Required Tools
Tool Part Number Part Description Qty
E 249-2937(1) Seal Locator As 1
5P-7310(1) Bolt 3
9S-8858(1) Nut (Seal Installer) 1
6V-6143(1) Seal Installer 1
5P-1733(2) Seal Locator As 1
5P-7309(2) Bolt 3
9S-8858(2) Nut (Seal Installer) 1
6V-6142(2) Seal Installer 1
F(3) 5P-7301 Seal Locator 1
5P-7309 Bolt 2
9S-8858 Nut (Seal Installer) 1
8T-2683 Rear Seal Installer 1
(1) Large pilot for crankshaft gear (approximately 85 mm (3.3 inch) diameter)
(2) Small pilot for crankshaft gear (approximately 52 mm (2.0 inch) diameter)
(3) For use when the rear gear group is installed.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01513824
Clean the outside diameter of the crankshaft.Note: Install the crankshaft rear seal with the arrow that shows the direction of crankshaft rotation toward the rear of the engine.
Use Tooling (E) to install crankshaft wear sleeve (2) and crankshaft rear seal (1) as a unit.Note: Use Tooling (F) when the rear gear group is installed.End By:
Install the flywheel. Refer to Disassembly and Assembly, "Flywheel - Remove and Install".
Cat SIS web machinery list:
Parts coupling Caterpillar catalog:
14E, 966C, 977K, D6C, D7G
545, 627, 627B, 973, 973C, D6C
518, 950, 955K
225, 227, 229, 229D, 231D
1P9919
COUPLING ASSEM. (45 degrees)
120G, 12G, 130G, 140G, 14G, 16G, 183B, 193, 215B, 225, 227, 245, 561D, 633D, 777, 824C, 834B, 980C, 988B, 992C, D10, D8K, D8L, D9H, D9L, IT18
120G, 12G, 130G, 140G, 14G, 16G, 183B, 193, 215B, 225, 227, 245, 561D, 633D, 777, 824C, 834B, 980C, 988B, 992C, D10, D8K, D8L, D9H, D9L, IT18
120G, 12G, 130G, 140, 141, 14E, 14G, 153, 16G, 225, 227, 235, 518, 518C, 528, 621B, 623B, 627B, 631D, 633D, 637D, 639D, 768C, 769C, 773B, 777, 814B, 814S, 816, 824C, 825C, 910, 916, 920, 930, 931, 931...
5P0478
COUPLING
225, 235, 955K, 955L, 977K, 983, D4D, D5, D6C, D7F, D8H, D9G, D9H
225, 235, 955K, 955L, 977K, 983, D4D, D5, D6C, D7F, D8H, D9G, D9H
5P2491
COUPLING
120G, 12G, 130G, 140G, 14G, 16G, 235, 245, 988B, 992C
120G, 12G, 130G, 140G, 14G, 16G, 235, 245, 988B, 992C
2V0568
COUPLING
225, 235, 621B, 627B, 637D, 988B
225, 235, 621B, 627B, 637D, 988B
2V0569
COUPLING
225, 235
225, 235
4N5687
COUPLING
245
245
235, 518, 633D, 637D, 769C, 773B, 814B, 815B, 824C, 825C, 910, 931B, AD40, AD45, AE40, D10, D3B, R1700 II