COUPLING AS 8T3724 - Caterpillar

start by:a) remove camshaftb) remove flywheel housingc) remove pistonsd) remove timing gears and plate 1. Use tool (A) to remove the camshaft bearings from cylinder block starting with the rear bearing.Install Camshaft Bearings
1. Use tool group (A) to install the camshaft bearings in the cylinder block starting with the rear bearing.2. Install all bearings with the oil hole in each bearing in alignment with oil hole in cylinder block. The front bearing has two oil holes. 3. Install the front bearing (1) so there is .11 in. (2.79 mm) from the machined surface of cylinder block.end by:a) install timing gears and plateb) install camshaftc) install pistonsd) install flywheel housing