COVER 0009902 - Caterpillar

Removal Procedure
Start By:
Release the hydraulic system pressure. Refer to Disassembly and Assembly, "Hydraulic System Pressure - Release".
Remove the seat. Refer to Disassembly and Assembly, "Seat - Remove and Install".Note: Put identification marks on all lines, on all hoses, on all wires, and on all tubes for installation purposes. Plug all lines, hoses, and tubes. This helps to prevent fluid loss and this helps to keep contaminants from entering the system.
Illustration 1 g01260602
Remove armrest (1) .
Illustration 2 g01260603
Remove bracket (2) and panel (3) .
Illustration 3 g01260607
Remove boot (4) and plate (5) .
Illustration 4 g01260610
Disconnect harness assembly (6) . Remove screws (7) and joystick (8) .Installation Procedure
Illustration 5 g01260610
Install joystick (8) and screws (7) . Connect harness assembly (6) .
Illustration 6 g01260607
Install boot (4) and plate (5) .
Illustration 7 g01260603
Install panel (3) and bracket (2) .
Illustration 8 g01260602
Install armrest (1) .End By: Install the seat. Refer to Disassembly and Assembly, "Seat - Remove and Install".