COVER 0010322 - Caterpillar

Illustration 1 g01352588
Alignment
Illustration 2 g01352592
Typical example
Tighten the setscrew to the sequence that is shown in Illustration 2 to the following torque. ... 28 3 N m (21 2 lb ft) (13) Tighten the bolts that fasten the water pump to the front housing to the following torque. ... 22 5.5 N m (16 4 lb ft) (14) Tighten the bolts that fasten the front cover to the front housing to the following torque. ... 22 5.5 N m (16 4 lb ft)
Illustration 3 g01352593
Typical example
Note: Refer to Specifications, "Water Pump" for the correct bolt tightening sequence for the water pump.