COVER 0010347 - Caterpillar

Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 8T-3207 Lifting Bracket 1
5P-8622 Shackle 1
9S-9076 Spacer 1
7X-2557 Bolt 2 Note: Cleanliness is an important factor. Before you begin the installation procedure, the exterior of the components should be thoroughly cleaned. This will help to prevent dirt from entering the internal mechanism.
Illustration 1 g00956633
Adjust bracket (1) until Dimension (X) is equal to 80 mm (3.0 inch).
Illustration 2 g01237341
Illustration 3 g01237514
Attach Tooling (A) and a suitable lifting device to final drive (3). Position final drive (3). The weight of final drive (3) is approximately 408 kg (900 lb).
Install bolts (4) and bolts (5). Remove Tooling (A).
Illustration 4 g00986692
Install bolts (2).
Fill the final drive with oil. Refer to Operation and Maintenance Manual, "Final Drive Oil - Change". End By:
Install the axle. Refer to Disassembly and Assembly, "Axle - Install".
Connect the track. Refer to Disassembly and Assembly, "Track - Connect".