COVER AS 1114639 - Caterpillar

Illustration 1 g00448798
Place the steering pilot valve in the position, as shown.
Illustration 2 g00448799
Remove bolts (4) and valve body assembly (3) from main body assembly (1).
Remove plunger (2).
Illustration 3 g00448800
Remove O-ring seals (5) and O-ring seal (6) from valve body assembly (3).
Illustration 4 g00842709
Personal injury can result from being struck by parts propelled by a released spring force.Make sure to wear all necessary protective equipment.Follow the recommended procedure and use all recommended tooling to release the spring force.
Remove plug (11).
Remove O-ring seal (12) from plug (11).
Remove sleeve (13).
Remove slug (14) and stem assembly (15).
Remove retaining ring (10), retainer (9), and spring (8) from stem (7).
Remove spring (16) from valve body assembly (3).
Illustration 5 g00448823
Remove bolts (17).
Illustration 6 g00842724
Remove cover (18) and O-ring seal (19). Note: Note the location of Hole (X) and Hole (Y).
Remove spool (20).
Remove ring (21) and O-ring seal (22).
Remove two bolts (23) and bolt (24) from upper body assembly (25).
Remove upper body assembly (25) from lower body assembly (27).
Remove O-ring seal (26).
Illustration 7 g00448825
Personal injury can result from being struck by parts propelled by a released spring force.Make sure to wear all necessary protective equipment.Follow the recommended procedure and use all recommended tooling to release the spring force.
Note: The ends of spring (29) must be spread in order to remove shaft assembly (28).
Use two screwdrivers in order to spread the ends of spring (29).
Illustration 8 g00448826
Remove shaft assembly (28) from lower body assembly (27).
Illustration 9 g00448827
Illustration 10 g00448828
Remove retaining ring (30), cam (31), and key (32) from shaft assembly (28).
Use Tooling (A) to remove ball bearings (33) from shaft assembly (28).
Illustration 11 g00448829
Personal injury can result from being struck by parts propelled by a released spring force.Make sure to wear all necessary protective equipment.Follow the recommended procedure and use all recommended tooling to release the spring force.
Remove spring (29) from shaft assembly (28).
Illustration 12 g00448831
Remove lip seal (34) from lower body assembly (27).