COVER 1196336 - Caterpillar

Illustration 1 g00101428
Unlatch the engine hood and raise the engine hood.
Illustration 2 g00104885
Loosen hose clamp (1) and disconnect outlet hose (2) from breather (3) .
Loosen bolt (4) . Remove breather (3) and seal.Note: Refer to Operation and Maintenance Manual, "General Hazard Information" for information on containing fluid spillage.
Wash breather (3) in a clean, nonflammable solvent.
Inspect the seal. If the seal is damaged, install a new seal.
Install the O-ring seal and clean breather (3) . Tighten bolt (4) to 14 3 N m (10 2 lb ft) .
Slide hose on breather (3) . Tighten hose clamp (1) .
Close the engine hood and latch the engine hood.