COVER 1307093 - Caterpillar

Disassembly Procedure
Table 1
Required Tools    
Tool    Part Number    Part Description    Qty    
A     5P-5197     Retaining Ring Pliers As     1    
B     5F-4764     Pry Bar     2    Start By:
Remove the parking brake. Refer to Disassembly and Assembly, "Parking Brake - Remove".Note: The service brakes for the fixed axle and the oscillating axle are the same. The same disassembly procedure is used for the service brakes on both axle assemblies.
Illustration 1 g01207239
Remove reaction plate (1) .
If necessary, mark the location and remove four studs (2) .
Illustration 2 g01207240
Remove three sprigs (3) .
Remove friction disc adapter (4) and the friction discs as an assembly.
Illustration 3 g01207242
Use Tooling (A) in order to remove retaining ring (7) .
Remove friction discs (5) and reaction plate (8) and spacer (6) from adapter (4) .
Illustration 4 g01207254
Use Tooling (A) in order to remove retaining ring (9) and spacer (10) from adapter (4) .
Illustration 5 g01207243
Remove three springs (11) .
Remove lower reaction plate (12) .
Illustration 6 g01207245
Use Tooling (B) in order to pry brake piston (13) up and away from the piston seals.
Remove brake piston (13) from the differential housing assembly.
Illustration 7 g01207246
Remove seals (14) and (15) .