COVER 1507194 - Caterpillar

Removal Procedure
Start By:
Remove the seat. Refer to Disassembly and Assembly, "Seat - Remove and Install".
Illustration 1 g00836463
Remove two panels (1).
Illustration 2 g00929057
Remove three bolts (3). Disconnect five harness assemblies (2). Disconnect air conditioner pressure switch (2A). Remove the housing assembly.
Illustration 3 g00836467
Remove three nuts (5). Remove clip (4). Remove wheel (6).
Repeat Step 3 for the opposite side.
Illustration 4 g00930591
Remove locknut (7). Remove fan motor (8). Installation Procedure
Illustration 5 g00930591
Install fan motor (8). Install locknut (7). Tighten the locknut to a torque of 4.5 0.5 N m (39.80 4.40 lb in).
Illustration 6 g00836467
Install wheel (6). Install clip (4). Install three nuts (5).
Repeat Step 2 for the opposite side.
Illustration 7 g00929061
Install the housing assembly. Connect air conditioner pressure switch (2A). Connect five harness assemblies (2). Install three bolts (3). Tighten the three bolts to a torque of 25 4 N m (18.4 2.9 lb ft).
Illustration 8 g00836463
Install two panels (1). End By:
Install the seat. Refer to Disassembly and Assembly, "Seat - Remove and Install".