COVER 1602323 - Caterpillar

Illustration 1 g06084586
(1) Settings
(2) Screen backlight
(3) Logs and counters
(4) HelpThe menu options are separated into four main sections. Selecting an icon will navigate to that section. Once in the section, select an icon to either toggle the function or navigate to a submenu.Settings (1)
Illustration 2 g06083216
(5) Mode
(6) Start Disabled
(7) Starter Mode
(8) Prelube Override
(9) Button Beep
(10) Language
(11) Units
(12) Wallpaper
(13) Engine Overspeed Test
(14) Connect a PC
(15) Administration
(16) Interface Design
(17) Fuel PrimingMode (5)
Depending on the configuration of the DCU, some of the following modes will be available.
Locked to Input - As shipped from the factory, the MGCP IIIB is programmed to control the DCU mode using the ECS. The mode cannot be changed from the menu. If the panel configuration has been changed, the options below may be available.
Local - Only local operation is allowed.
Manual or Remote - Remote operation is allowed. Local operation is allowed only if enabled in the configuration.
Automatic - Automatic and remote operation is allowed. Local operation is allowed if enabled in the configuration.
Emergency - All overridable shutdowns will become alarms. Overspeed is never overridable. Other shutdowns, such as "Oil Pressure", may be configured as non-overridable. Local, remote, and automatic operations are allowed.
Harbor - Shutdowns are not overridden. Remote operation is allowed. Local operation is allowed if enabled in the configuration.Modes and Engine Application
The engine application set in the configuration determines the modes that will be available. Refer to Table 1.
Table 1
Engine Applications and Available Modes
Engine Application Available Modes
Auxiliary Local, Manual, Automatic
Combined Local, Emergency, Harbor
Emergency Local, Emergency
Propulsion Local, Remote Start Disabled (6)
Select the "Start Disabled" icon to toggle the function between "Active" and "Inactive".
Start Disabled is active
Start Disabled is inactiveStarter Mode (7)
The panel is configured for one starter as shipped from the factory. An optional starter selector switch may be installed.The panel may be configured to allow starter selection from the Start Screen. This configuration allows starter selection from a remote panel as well.If multiple starters are configured, selecting the "Starter Mode" icon will navigate to a submenu. The new mode can be selected in the submenu. The number indicates which starter will be used for the first start attempt of an Auto Start cycle.Note: The Auto Start cycle is not a local or remote start. The Auto Start cycle is only a single cycle.
Electric
Air
Electric then air
Air then electric
Electric and airPrelube Override (8)
Prelube Override is active or not available
Prelube Override is inactiveNote: By default, Prelube Override is not enabled in the configuration.Button Beep (9)
Button beep enabled
Button beep disabledLanguage (10)
The display can be configured to show the following languages:
English
French
Spanish
Italian
German
Dutch
Russian
Norwegian
Simplified Chinese
Japanese
Portuguese
Vietnamese
KoreanUnits (11)
Changing the units will affect the display gauges and web tool settings. Alarm set points will automatically convert.
US units
Metric unitsWallpaper (12)
Illustration 3 g06083357
(18) Instrument
(19) Menu
(20) PopupThe wallpaper can be customized for the screens seen in Illustration 3. There are several preinstalled wallpapers that may be selected. One wallpaper can be uploaded by the user using a USB drive or the web tool.Engine Overspeed Test (13)
Engine Overspeed Test Active
Engine Overspeed Test InactivePlacing the DCU into "Engine Overspeed Test" will lower the overspeed