COVER AS-VALVE 1687553 - Caterpillar

1687553 COVER AS-VALVE Caterpillar parts 3003, 301.5, 3013

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA1687553
168-7553
1687553

Weight: 2 pounds 1 kg.

Buy COVER AS-VALVE 1687553 Caterpillar genuine, new aftermarket tractor parts with delivery
INDUSTRIAL ENGINE, MINI HYD EXCAVATOR,

Compatible equipment models: 1687553:

INDUSTRIAL ENGINE 3003 3013

MINI HYD EXCAVATOR 301.5 Caterpillar

Number on catalog scheme: 1

Caterpillar 1687553 Parts scheme COVER AS-VALVE

For full view, you need register

Information:

Removal Procedure
Start By:
Remove the rotor drive belt.
Remove the clean emissions module (or muffler if equipped).
Turn the battery disconnect switch to the OFF position.
Illustration 1 g06102787
Remove three bolts (2). Remove two bolts (3). With the assistance of another person, remove access panel (4). The weight of access panel (4) is approximately 68 kg (150 lb)
Illustration 2 g06130009
Remove two bolts (6). Disconnect hose assembly (5) and place entire assembly out of the way.
Illustration 3 g06130045
Remove two bolts (7). Remove belt guard (9).
After removing belt guard (9), reinstall bolts (7) to hold access cover (8) in place.
Illustration 4 g06130057
Remove two bolts (11).
Remove four bolts (10). Repeat process for opposite side of mounting bracket (12). With the assistance of another person, remove mounting bracket (12). The weight of mounting bracket (12) is approximately 34 kg (75 lb)
Illustration 5 g06130084
Attach a suitable lifting device to rotor drive clutch assembly (14). The weight of rotor drive clutch assembly (14) is approximately 200 kg (441 lb).
Remove remaining ten bolts (13). Remove rotor drive clutch (14).Installation Procedure
Install rotor drive clutch assembly (14) in the reverse order of removal.