1843983 COVER AS Caterpillar parts
320B, 320B U, 320C, 320C FM, 320C L, 320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 320D2, 320D2 GC, 320D2 L, 320E, 320E L, 320E LN, 320E LRR, 320E RR, 321C, 321D LCR, 322B L,...
Rating:
Alternative (cross code) number:
CA1843983
184-3983
1843983
CA1843983
184-3983
1843983
Weight: 2 pounds 0 kg.
EXCAVATOR, WHEELED EXCAVATOR,
Compatible equipment models: 1843983:
Number on catalog scheme:
8
For full view, you need register
Information:
Machine Stopping
Park on a level surface. If it is necessary to park on a grade, block the tracks securely.
1. Move the governor control lever forward slightly to reduce the engine speed. 2. Release the travel and directional control levers to stop the machine. 3. Place machine implements in the servicing position.4. Return the control levers to the HOLD position. 5. Move the hydraulic activation control lever back to the locked position.Freezing Conditions
If freezing temperatures are expected, each track roller frame should be cleaned of mud and dirt and the machine parked on wood planks. 1. Position the boom over one side. 2. Use boom down pressure to lift the track on that side off the ground. Operate the track in forward, then reverse until the maximum amount of material is thrown clear.3. Lower the track onto the planks.4. Repeat the procedure for the other track.5. Clean in and around the carrier rollers and track rollers.6. Lower the implement onto a plank.Engine Stopping
Stopping the engine immediately after it has been working under load, can result in overheating and accelerated wear of the engine components. Follow the stopping procedure outlined below to allow the engine to cool and to prevent excessive temperatures.
Never turn the disconnect key to OFF while the engine is running. 1. Move the governor control lever forward to the LOW IDLE position. 2. Operate the engine at LOW IDLE for five minutes. This allows hot areas in the engine to cool gradually, extending engine life. 3. Turn the start key switch to "OFF" to stop the engine.Leaving the Machine
1. Remove the start switch key.2. Inspect the engine compartment for debris. Clean out any debris and paper to avoid fire hazard.3. Use handholds and steps, use both hands and face the machine, when dismounting. 4. Turn the disconnect switch OFF and remove the key. This could protect against vandalism. 5. When leaving the machine, close the windows and lock the cab door.6. Lock vandalism covers and cap, such as battery box cover, engine hood, side covers and fuel tank cap. 7. Unfasten the wing nut and remove the vandalism guards from cab. 8. Install the vandalism guards to the front window and cab door and lock them.
Park on a level surface. If it is necessary to park on a grade, block the tracks securely.
1. Move the governor control lever forward slightly to reduce the engine speed. 2. Release the travel and directional control levers to stop the machine. 3. Place machine implements in the servicing position.4. Return the control levers to the HOLD position. 5. Move the hydraulic activation control lever back to the locked position.Freezing Conditions
If freezing temperatures are expected, each track roller frame should be cleaned of mud and dirt and the machine parked on wood planks. 1. Position the boom over one side. 2. Use boom down pressure to lift the track on that side off the ground. Operate the track in forward, then reverse until the maximum amount of material is thrown clear.3. Lower the track onto the planks.4. Repeat the procedure for the other track.5. Clean in and around the carrier rollers and track rollers.6. Lower the implement onto a plank.Engine Stopping
Stopping the engine immediately after it has been working under load, can result in overheating and accelerated wear of the engine components. Follow the stopping procedure outlined below to allow the engine to cool and to prevent excessive temperatures.
Never turn the disconnect key to OFF while the engine is running. 1. Move the governor control lever forward to the LOW IDLE position. 2. Operate the engine at LOW IDLE for five minutes. This allows hot areas in the engine to cool gradually, extending engine life. 3. Turn the start key switch to "OFF" to stop the engine.Leaving the Machine
1. Remove the start switch key.2. Inspect the engine compartment for debris. Clean out any debris and paper to avoid fire hazard.3. Use handholds and steps, use both hands and face the machine, when dismounting. 4. Turn the disconnect switch OFF and remove the key. This could protect against vandalism. 5. When leaving the machine, close the windows and lock the cab door.6. Lock vandalism covers and cap, such as battery box cover, engine hood, side covers and fuel tank cap. 7. Unfasten the wing nut and remove the vandalism guards from cab. 8. Install the vandalism guards to the front window and cab door and lock them.
Cat SIS web machinery list:
Parts cover Caterpillar catalog:
311, 311B, 312, 312B, 313D2 LGP, 315, 315B, 315B FM L, 315B L, 315C, 315D L, 316E L, 317, 317B LN, 318B, 318C, 318D L, 318D2 L, 318E L, 319C, 319D, 319D L, 319D LN, 320 L, 320B, 320B L, 320C, 320C L, ...
315C, 315D L, 318B, 318C, 318E L, 319C, 319D, 319D L, 319D LN, 320 L, 320B, 320C, 320C FM, 320C L, 320D, 320D FM, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 320D2, 320D2 GC, 320D2 L, 320E, 320E L, 3...
307C, 307D, 311C, 311D LRR, 311F LRR, 312C L, 312D, 312D L, 312D2, 312D2 GC, 313D, 313D2, 315C, 315D L, 318C, 318D L, 318D2 L, 319D L, 320C, 320C FM, 320C L, 320D, 320D FM, 320D GC, 320D L, 320D LN, 3...
311C, 311D LRR, 312C, 312C L, 312D, 312D L, 313D, 314C, 314D CR, 314D LCR, 315D L, 318C, 318D L, 319C, 319D, 319D L, 319D LN, 320C, 320C FM, 320C L, 320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN...
318C, 319C, 320 L, 320B, 320C, 320C FM, 320C L, 320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 321C, 321D LCR, 323D L, 323D LN, 323D SA
312D, 320B, 320C, 323D LN, 323D SA, 323E L, 325, 325 L, 325 LN, 325B, 325B L, 325C, 325D, 325D L, 325D MH, 328D LCR, 329D, 329D L, 329D LN, 329E, 329E L, 329E LN, 330, 330 FM L, 330 L, 330B L, 330C, 3...
311, 311B, 312, 312B, 320, 320 L, 320B, 320B FM LL, 320N
320B, 322B L, 325, 325 L, 325 LN, 325B, 325B L, OEMS
322B, 322B L, 322B LN
322, 322 FM L, 322B, 322B L, 322B LN, OEMS
320B, 320C, 320C FM
320C, 320C FM, 320D, 320D FM, 320D FM RR, 322C, 322C FM, 323D LN, 323D SA, 323E L, 324D, 324D L, 324D LN, 324E, 324E L, 324E LN, 325C, 325C FM, 325D, 325D L, 325D MH, 326D L, 329D, 329D L, 329D LN, 32...
1677579
COVER
CB-334E, CB-335D, CB-34
CB-334E, CB-335D, CB-34
1682091
COVER
CB-334E, CB-335D, CB-34
CB-334E, CB-335D, CB-34
1449978
COVER
CB-334D, CB-334E, CB-335D
CB-334D, CB-334E, CB-335D
1460738
COVER AS
CB-334D, CB-335D
CB-334D, CB-335D
1452353
COVER AS-CONSOLE
CB-334D, CB-335D
CB-334D, CB-335D
1709166
COVER
CB-334D, CB-334E
CB-334D, CB-334E
1669098
COVER
CP-433E, CP-44, CP-533E, CP-56, CP-573E, CP-64, CP-663E, CP-76, CS-423E, CS-433E, CS-44, CS-531D, CS-533D, CS-533E, CS-54, CS-56, CS-563D, CS-563E, CS-573D, CS-583D, CS-583E, CS-64, CS-663E, CS-683E, ...
CP-433E, CP-44, CP-533E, CP-56, CP-573E, CP-64, CP-663E, CP-76, CS-423E, CS-433E, CS-44, CS-531D, CS-533D, CS-533E, CS-54, CS-56, CS-563D, CS-563E, CS-573D, CS-583D, CS-583E, CS-64, CS-663E, CS-683E, ...
CP-433E, CP-533E, CP-56, CP-573E, CP-64, CP-663E, CP-76, CS-423E, CS-433E, CS-531D, CS-533D, CS-533E, CS-563D, CS-563E, CS-573D, CS-583D, CS-583E, CS-663E, CS-683E, CS-74
1566818
COVER AS
CS-531D, CS-563D, CS-583D
CS-531D, CS-563D, CS-583D
1722414
COVER
CS-533D, CS-563D
CS-533D, CS-563D
2264381
COVER
CP-533E, CP-54B, CP-56, CP-573E, CP-64, CP-68B, CP-74B, CS-533E, CS-54, CS-54B, CS-56, CS-563D, CS-563E, CS-56B, CS-583E, CS-64, CS-64B, CS-66B, CS-68B, CS-74, CS-74B
CP-533E, CP-54B, CP-56, CP-573E, CP-64, CP-68B, CP-74B, CS-533E, CS-54, CS-54B, CS-56, CS-563D, CS-563E, CS-56B, CS-583E, CS-64, CS-64B, CS-66B, CS-68B, CS-74, CS-74B
1587717
COVER
CS-531D, CS-533D, CS-563D, CS-573D, CS-583D
CS-531D, CS-533D, CS-563D, CS-573D, CS-583D