COVER GP-VALVE MECHANISM 1903766 - Caterpillar

1. Loosen nuts (2).2. Remove cotter pins and pins that connect rod ends (3) to levers (5)3. Push levers (5) all the way toward the front of the machine against bumpers (4).4. Make an adjustment to rod ends (3) so distance (A) between the centerline of handles (1) and the face of the dash is ... 2.50 .12 in.(63.5 3.1 mm).5. Install the pins and cotter pins that connect rod ends (3) to levers (5).6. Tighten nuts (2) against rod ends (3) to ... 75 10 lb. ft.(100 14 N m)7. Loosen nuts (9).8. Remove the cotter pins and pins that connect rod ends (8) to levers (12).9. Make an adjustment to rod ends (8) so the length of the rods is changed until distance (B) between the centerline of the pins is ... 18.50 .12 in.(469.9 3.1 mm).10. Install the pins and cotter pins that connect rod ends (8) to levers (12).11. Tighten nuts (9).12. Loosen nuts (10).13. Remove the cotter pins and pins (11) that connect rod ends (7) to levers (12).14. Pull rods (6), one at a time, toward the front of the machine until a resistance is felt.15. Make an adjustment to rod ends (7), one at a time, so pins (11) can be installed through the rod ends into levers (12).16. Turn rod ends (7), one at a time, 1/2 turn so the length of rods (6) is made shorter.17. Put rod ends (7) in position on levers (12) and install pins (11) and cotter pins.18. Tighten nuts (10) to ... 9 3 lb. ft.(12 4 N m)