COVER AS 1961010 - Caterpillar

1961010 COVER AS Caterpillar parts 303

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA1961010
196-1010
1961010

Weight: 6 pounds 2 kg.

Buy COVER AS 1961010 Caterpillar genuine, new aftermarket tractor parts with delivery
MINI HYD EXCAVATOR,

Compatible equipment models: 1961010:

MINI HYD EXCAVATOR 303 Caterpillar

Number on catalog scheme: 1

Caterpillar 1961010 Parts scheme COVER AS

For full view, you need register

Information:

Illustration 9 g03862791
Position plate (29) and install bolts (28). Repeat this step for the opposite side of the machine.
Illustration 10 g03862823
Connect harness assembly (26). Connect harness assembly (25).
Illustration 11 g03862825
Install panel (24). Repeat this step for the opposite side of the machine.
Illustration 12 g03862828
Connect hose assembly (23).
Illustration 13 g03862831
Install tube assembly (21). Install hose (22). Connect hose (19). Connect hose assembly (20). Install tube assembly (18).
Illustration 14 g03862835
Install O-ring seal (12). Repeat this step for the opposite side of the machine.
Illustration 15 g03862840
Illustration 16 g03862844
Use Tooling (A), Tooling (B), and suitable lifting devices to install tandem assembly (14) and wheel assemblies (15). The combined weight of tandem assembly (14) and wheel assemblies (15) is approximately 1450 kg (3200 lb).
Illustration 17 g03862848
Install bolts (16).
Illustration 18 g03862852
Position plate (10) and install bolts (11). Position plate assemblies (13) and install bolts (12).
Illustration 19 g03862857
Position tube assembly (9) and install bolts (8). Connect hose assembly (7).
Illustration 20 g03862863
Install guard (6). Repeat this step for the remaining guard.
Illustration 21 g03862872
Attach a suitable lifting device to link assembly (2) The weight of link assembly (2) is approximately 102 kg (225 lb). Move link assembly (2) into position to be installed. Install pin (4) and bolt (5).
Illustration 22 g03862879
Attach a suitable lifting device to link assembly (2). The weight of link assembly (2) is approximately 102 kg (225 lb). Install pin (3).
Illustration 23 g03862883
Remove suitable cribbing from under ripper (1).
Repeat Steps 12 through 17 for the opposite side of the machine.
Fill the rear axle with oil. Refer to Operation and Maintenance Manual, "Transmission and Differential Oil - Change".End By:
Install the differential lock valve.
Install the drive chains.
Separate the steering frame lock.