COVER 1W2488 - Caterpillar

Start By:
Remove fuel filter base.Removal Procedure
Illustration 1 g06029773
Drain oil filters (1). Refer to Operation and Maintenance Manual, "Engine Oil and Filter - Change" for the correct procedure.
Illustration 2 g06029497
Side view of filter base.
Disconnect harness assembly (2) and tube assembly (3). Disconnect tube assembly (4) and tube assembly (5) and position out of the way.
Illustration 3 g06029758
Remove oil filters (8) and remove bolts (6). Remove oil filter base (7).
Illustration 4 g06029970
Left side of bracket.
Remove bolt (9) and p-clip (10).
Illustration 5 g06030024
Right side of bracket.
Remove bolts (11). Remove bolts (12).
Illustration 6 g06030489
Remove bolts (13). Remove bolts (14). Remove oil filter base bracket (15).Installation Procedure
Install oil filter base (7) in the reverse order of removal.
Tighten bolts (14) to a torque of 25 3 N m (221 27 lb in).
Tighten bolts (13) to a torque of 38 8 N m (28 6 lb ft).
Tighten bolts (12) to a torque of 25 3 N m (221 27 lb in).
Tighten bolts (11) to a torque of 38 8 N m (28 6 lb ft).
Tighten bolts (9) to a torque of 25 3 N m (221 27 lb in).
Tighten bolts (6) to a torque of 46 5 N m (34 4 lb ft).
Tighten the bolts on tube assembly (5) to a torque of 25 3 N m (221 27 lb in).
Tighten the bolts on tube assembly (4) to a torque of 25 3 N m (221 27 lb in).