COVER 2017453 - Caterpillar

Illustration 4 g00936079
Disconnect hose assemblies (4). Disconnect tube assembly (5) .
Illustration 5 g00936082
Remove bolt (6) .
Illustration 6 g01022457
Remove bolts (6A). Remove heat shield (6B) .
Illustration 7 g00936084
Disconnect hose assemblies (7). Remove two fittings (8). Remove bolts (9) .
Illustration 8 g00936088
Remove tank (10) .
Illustration 9 g00936089
Remove hose assemblies (11) and remove fittings (12). Remove plugs (13) .Installation Procedure
Note: Cleanliness is an important factor. Before assembly, all parts should be thoroughly cleaned in cleaning fluid. Allow the parts to air dry. Wiping cloths or rags should not be used to dry parts. Lint may be deposited on the parts which may cause later trouble. Inspect all parts. If any parts are worn or damaged, use new parts for replacement.
Illustration 10 g00936089
Install plugs (13). Install fittings (12) and install hose assemblies (11) .
Illustration 11 g00936088
Install tank (10) .
Illustration 12 g00936084
Install bolts (9). Install two fittings (8). Connect hose assemblies (7) .
Illustration 13 g01022457
Install heat shield (6B). Install bolts (6A) .
Illustration 14 g00936082
Install bolt (6) .
Illustration 15 g00936079
Connect hose assemblies (4). Connect tube assembly (5) .
Illustration 16 g00994028
Install reservoir (3) and install bolts (2) .
Illustration 17 g00994025
Position filter (1B) to the original location and install bolts (1A) .
Illustration 18 g00936074
Connect tube assembly (1) .End By:
Install the batteries. Refer to Disassembly and Assembly, "Battery - Remove and Install".
Install the hood. Refer to Disassembly and Assembly, "Hood - Remove and Install".