COVER GP-MTG& 2195603 - Caterpillar

Personal injury or death can result from sudden machine movement.Sudden movement of the machine can cause injury to persons on or near the machine.To prevent injury or death, make sure that the area around the machine is clear of personnel and obstructions before operating the machine.
Specifications
Table 1
Torque converter stall speed RPM
1700 50 Introduction
The torque converter stall test helps determine if the engine is producing the correct power output. This stall test is used in many diagnostic procedures.Test Preparation
Move the machine to a level area.
Engage the parking brake.
Shift the transmission to the NEUTRAL position.
Place the work tool flat on the ground.
Warm the transmission oil to a normal operating temperature of 95° 20°C (203° 36°F). Test Procedure
Illustration 1 g01445414
Select "Service" from the "Home Menu" on the Advisor display.
Illustration 2 g01445436
Select "Service Modes" from the "Service" menu.
Illustration 3 g01445450
Select "Implement" from the "Service Modes" menu.
Illustration 4 g01446860
Select "Stall Checks" from the "Implement" menu.
Illustration 5 g01446865
Select "Third Gear Stall Spd" from the "Stall Checks" menu.
Follow the steps that are displayed on the screen in order to complete the test.
To ensure that the transmission oil does not overheat do not keep the torque converter in the stall condition for more than 30 seconds. After the torque converter stall test allow the transmission oil to cool before stopping the engine.
After the test is completed, allow the engine coolant and the transmission oil to cool. Stop the engine. If the torque converter stall speed is above the specified range, the engine power output could be too high. Another cause of the torque converter stall speed being above the specified range is excess slippage of the torque converter.If the torque converter stall speed is below the specified range, the engine may not be developing full power. Another cause of the torque converter stall speed being below the specified range is excessive parasitic load on the engine.