COVER-WATER PUMP 2334877 - Caterpillar

Product smu/age whichever comes first Caterpillar Dealer Suggested Customer Suggested
Parts % Labor Hrs% Parts % Labor Hrs% Parts % Labor Hrs%
*******Group 3*******
0-2000 hrs,
0-12 mo 100.0% 100.0% 0.0% 0.0% 0.0% 0.0%
This is a 1.0-hour job for Group 3
PARTS DISPOSITION
Handle the parts in accordance with your Warranty Bulletin on warranty parts handling.
Rework Procedure
Group Number 1
1. Park the machine on a level surface.
2. Lower the work tool to the ground.
3. Move the hydraulic lockout control to the LOCKED position. For further details on this procedure, refer to Operation and Maintenance Manual, "Operator Controls".
4. Stop the engine.
5. Replace the existing 443-7858 Mirror (1) with new 327-6550 Mirror Group. Refer to Image1.2.1.
Image1.2.1
6. Replace the existing 443-7858 Mirror (2) with new 394-9460 Mirror Group. Refer to Image1.3.1.
7. Replace the existing 443-7855 Mirror (3) with new 394-9459 Mirror Group. Refer to Image1.3.1.
Image1.3.1
8. Adjust rear view mirrors in order to provide visibility behind the machine at a maximum distance of 30m (98ft) from the rear corners of the machine.
Note: For additional detail, Refer to SEBU9232, Operation and Maintenance Manual, 312F and 313F Excavators.
Group Number 2
1. Park the machine on a level surface.
2. Lower the work tool to the ground.
3. Move the hydraulic lockout control to the LOCKED position. For further details on this procedure, refer to Operation and Maintenance Manual, "Operator Controls".
4. Stop the engine.
5. Replace the existing 443-7858 Mirror (1) with a new 327-6550 Mirror Group. Refer to Image2.2.1.
6. Replace the existing 443-7858 Mirror (2) with a new 327-6550 Mirror Group. Refer to Image2.2.1.
Image2.2.1
7. Adjust the rear view mirrors in order to provide visibility behind the machine at a maximum distance of 30m (98ft) from the rear corners of the machine.
Note: For additional detail, refer to the Operation and Maintenance Manual.
Group Number 3
1. Park the machine on a level surface.
2. Lower the work tool to the ground.
3. Move the hydraulic lockout control to the LOCKED position. For further details on this procedure, refer to Operation and Maintenance Manual, "Operator Controls".
4. Stop the engine.
5. Replace the existing 443-7858 Mirror (1) with new 327-6550 Mirror Group. Refer to Image3.2.1.
Image3.2.1
6. Adjust the rear view mirrors in order to provide visibility behind the machine at a maximum distance of 30m (98ft) from the rear corners of the machine.
Note: For additional detail, refer to the Operation and Maintenance Manual.