2346475 COVER Caterpillar parts
1090, 1190, 1190T, 1290T, 1390, 312D, 315D L, 319D, 320C FM, 320D, 320D FM, 320D L, 320D LRR, 322C, 323D L, 323D LN, 324D, 324D L, 324D LN, 325D, 325D L, 325D MH, 330D, 330D L, 330D LN, 330D MH, 336D ...
Rating:
Alternative (cross code) number:
CA2346475
234-6475
2346475
CA2346475
234-6475
2346475
Weight: 1 pounds 0 kg.
EXCAVATOR, WHEELED EXCAVATOR,
Compatible equipment models: 2346475:
EXCAVATOR
312D
315D L
319D
320C FM
320D
320D FM
320D L
320D LRR
323D L
323D LN
324D
324D L
324D LN
325D
325D L
325D MH
330D
330D L
330D LN
330D MH
336D L
345C
345C L
345C MH
365C
365C L
365C L MH
385C
385C FS
385C L
385C L MH
M325D L MH
M325D MH
FRONT SHOVEL
385C
LOGGER
322C
Number on catalog scheme:
6
For full view, you need register
Information:
Illustration 1 g03228476
This diagnostic code is recorded when the Machine Control Module (MCM) does not receive expected information from the Input/Output Module (I/O Module) for more than 5 seconds over the AUTO CAN link.Test Step 1. INSPECT THE HARNESS CONNECTIONS.
Turn the key start switch and disconnect switch to the OFF position.
Inspect all harness connections that are related to the CAN link. Make sure that the connectors are clean and tight.
Check the connectors for proper mating. Ensure that all the seals are present and in place.
Check the harness for signs of damage or abrasion.
Check the wires at the connector. Ensure that the wires are secured tightly into the connector. Take care not to pull the wire out of the connector.
Check the exposed wires at the connectors for nicks or signs of abrasion.
Check for moisture inside the connector.
Check the connectors for dirty contacts or corroded contacts.
Check each pin and each socket of the machine harness connectors. Ensure that the contacts are properly installed. The contacts should mate correctly when the two pieces of the connector are placed together. Expected Result:The machine harness connectors are tight and free of corrosion.Results:
OK - The machine harness connectors are tight and free of corrosion. Proceed to Test Step 2.
NOT OK - The machine harness connectors are in need of repair.Repair: Repair the machine harness and/or the connector or replace the machine harness and/or the connector.STOPTest Step 2. CHECK FOR SHORTS TO GROUND
The key start switch and disconnect switch remain in the OFF position.
Disconnect the machine harness from all electronic control modules that use the Can link.
At the machine harness for the I/O module, measure the resistance between contacts J2-64 (wire K900-YL) and J2-65 (wire K990-GN) of the Can link and frame ground. Note all resistances.Expected Result:The resistance is greater than 5000 Ohms.Results:
OK - The resistance is greater than 5000 Ohms at all contacts. The harness circuit resistance is correct. Proceed to Test Step 3.
NOT OK - The resistance is less than 5000 Ohms at any of the contacts. The machine harness has failed. Repair: There is a short between frame ground and the Can link circuit in the machine harness with the low resistance. Repair the machine harness or replace the machine harness. STOPTest Step 3. CHECK THE MACHINE HARNESS FOR A SHORT TO THE +BATTERY CIRCUIT.
The key start switch and disconnect switch remain in the OFF position.
All related electronic control modules remain disconnected from the machine harness.
At the machine harness connector for the I/O module, perform the checks that are listed here:
Measure the resistance between the connector contact J1-64 (wire K900-YL) and all possible + battery sources.
Measure the resistance between the connector contact J1-65 (wire K990-GN) and all possible + battery sources. Note all resistances.Expected Result:The resistance is greater than 5000 Ohms. Results:
OK - The harness circuit resistance is correct. Proceed to Test Step 4.
NOT OK - The resistance is less than 5000 Ohms. The machine harness has failed. Repair: There is a short between the +battery circuit and the circuit of the
Cat SIS web machinery list:
Parts cover Caterpillar catalog:
311, 311B, 311C, 312, 312B, 315, 315B L, 315C, 315D L, 316E L, 317, 317B LN, 318B, 318C, 318D L, 318D2 L, 318E L, 319C, 319D, 319D L, 319D LN, 320 L, 320B, 320C, 320C L, 320D, 320D FM, 320D GC, 320D L...
311, 311B, 312, 312B, 313D2 LGP, 315, 315B, 315B FM L, 315B L, 315C, 315D L, 316E L, 317, 317B LN, 318B, 318C, 318D L, 318D2 L, 318E L, 319C, 319D, 319D L, 319D LN, 320 L, 320B, 320B L, 320C, 320C L, ...
315C, 315D L, 318B, 318C, 318E L, 319C, 319D, 319D L, 319D LN, 320 L, 320B, 320C, 320C FM, 320C L, 320D, 320D FM, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 320D2, 320D2 GC, 320D2 L, 320E, 320E L, 3...
307C, 307D, 311C, 311D LRR, 311F LRR, 312C L, 312D, 312D L, 312D2, 312D2 GC, 313D, 313D2, 315C, 315D L, 318C, 318D L, 318D2 L, 319D L, 320C, 320C FM, 320C L, 320D, 320D FM, 320D GC, 320D L, 320D LN, 3...
311C, 311D LRR, 312C, 312C L, 312D, 312D L, 313D, 314C, 314D CR, 314D LCR, 315D L, 318C, 318D L, 319C, 319D, 319D L, 319D LN, 320C, 320C FM, 320C L, 320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN...
318C, 319C, 320 L, 320B, 320C, 320C FM, 320C L, 320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 321C, 321D LCR, 323D L, 323D LN, 323D SA
312D, 320B, 320C, 323D LN, 323D SA, 323E L, 325, 325 L, 325 LN, 325B, 325B L, 325C, 325D, 325D L, 325D MH, 328D LCR, 329D, 329D L, 329D LN, 329E, 329E L, 329E LN, 330, 330 FM L, 330 L, 330B L, 330C, 3...
365B, 365B II, 365B L, 365C, 365C L, 365C L MH, 385B, 385C, 385C FS, 385C L, 385C L MH, 5090B, 776C, 776D, 777D, 854G, 992G, D11N, D11R, D400E II
325C, 328D LCR, 330C, 330C FM, 330C L, 330C MH, 330D, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN
3020455
COVER GP-CONSOLE
312D, 315D L, 319D, 323D L, 323D LN, 324D, 324D L, 324D LN, 325D, 325D L, 329D L, 330D, 330D L, 330D LN, 330D MH, 336D L, 336D LN, 345C, 345C L, 345D, 345D L, 365C, 365C L, 365C L MH, 374D L, 385C, 38...
312D, 315D L, 319D, 323D L, 323D LN, 324D, 324D L, 324D LN, 325D, 325D L, 329D L, 330D, 330D L, 330D LN, 330D MH, 336D L, 336D LN, 345C, 345C L, 345D, 345D L, 365C, 365C L, 365C L MH, 374D L, 385C, 38...
2827758
COVER AS
312D, 315D L, 319D, 323D L, 323D LN, 324D, 324D L, 324D LN, 325D, 325D L, 329D L, 330D, 330D L, 330D LN, 330D MH, 336D L, 336D LN, 345C, 345C L, 345D, 345D L, 365C, 365C L, 365C L MH, 374D L, 385C, 38...
312D, 315D L, 319D, 323D L, 323D LN, 324D, 324D L, 324D LN, 325D, 325D L, 329D L, 330D, 330D L, 330D LN, 330D MH, 336D L, 336D LN, 345C, 345C L, 345D, 345D L, 365C, 365C L, 365C L MH, 374D L, 385C, 38...
2476857
COVER-RADIO
312D, 315D L, 319D, 323D L, 323D LN, 324D LN, 325C, 325D, 325D L, 329D L, 330C L, 330D, 330D L, 330D LN, 336D L, 345C, 345C L, 365C, 365C L, 385C, 385C L, M313D, M315D, M316D, M318D, M318D MH, M322D, ...
312D, 315D L, 319D, 323D L, 323D LN, 324D LN, 325C, 325D, 325D L, 329D L, 330C L, 330D, 330D L, 330D LN, 336D L, 345C, 345C L, 365C, 365C L, 385C, 385C L, M313D, M315D, M316D, M318D, M318D MH, M322D, ...
2681352
COVER
312D, 315D L, 319D, 323D L, 323D LN, 324D LN, 325D, 325D L, 329D L, 330D, 330D L, 330D LN, 336D L, 345C, 345C L, 365C, 365C L, 385C, 385C L, M313D, M315D, M316D, M318D, M318D MH, M322D, M322D MH, M325...
312D, 315D L, 319D, 323D L, 323D LN, 324D LN, 325D, 325D L, 329D L, 330D, 330D L, 330D LN, 336D L, 345C, 345C L, 365C, 365C L, 385C, 385C L, M313D, M315D, M316D, M318D, M318D MH, M322D, M322D MH, M325...
2476852
COVER AS
312D, 315D L, 319D, 323D L, 323D LN, 324D LN, 325C, 325D, 325D L, 329D L, 330C L, 330D, 330D L, 330D LN, 336D L, 345C, 345C L, 365C, 365C L, 385C, 385C L, M313D, M315D, M316D, M318D, M318D MH, M322D, ...
312D, 315D L, 319D, 323D L, 323D LN, 324D LN, 325C, 325D, 325D L, 329D L, 330C L, 330D, 330D L, 330D LN, 336D L, 345C, 345C L, 365C, 365C L, 385C, 385C L, M313D, M315D, M316D, M318D, M318D MH, M322D, ...
2681353
COVER
312D, 315D L, 319D, 323D L, 323D LN, 324D LN, 325C, 325D, 325D L, 329D L, 330C L, 330D, 330D L, 330D LN, 336D L, 345C, 345C L, 365C, 365C L, 385C, 385C L, M313D, M315D, M316D, M318D, M318D MH, M322D, ...
312D, 315D L, 319D, 323D L, 323D LN, 324D LN, 325C, 325D, 325D L, 329D L, 330C L, 330D, 330D L, 330D LN, 336D L, 345C, 345C L, 365C, 365C L, 385C, 385C L, M313D, M315D, M316D, M318D, M318D MH, M322D, ...
3053606
COVER AS
M316D, M318D, M318D MH, M322D, M322D MH
M316D, M318D, M318D MH, M322D, M322D MH
2529843
COVER AS-ACCESS
M316D, M318D, M318D MH, M322D, M322D MH
M316D, M318D, M318D MH, M322D, M322D MH
2984411
COVER-MONITOR
M313D, M315D, M316D, M318D, M318D MH, M322D, M322D MH
M313D, M315D, M316D, M318D, M318D MH, M322D, M322D MH
953D, 963D, D5R LGP, D6K, D6K LGP, D6K XL, D6N, M313D, M315D, M315D 2, M316D, M317D 2, M318D, M318D MH, M322D, M322D MH, PL61
2476832
COVER
312D, 315D L, 319D, 323D L, 323D LN, 324D, 324D L, 324D LN, 325C, 325D, 325D L, 329D L, 330C L, 330D, 330D L, 330D LN, 330D MH, 336D L, 336D LN, 345C, 345C L, 345D, 345D L, 365C, 365C L, 365C L MH, 37...
312D, 315D L, 319D, 323D L, 323D LN, 324D, 324D L, 324D LN, 325C, 325D, 325D L, 329D L, 330C L, 330D, 330D L, 330D LN, 330D MH, 336D L, 336D LN, 345C, 345C L, 345D, 345D L, 365C, 365C L, 365C L MH, 37...
2476831
COVER
312D, 315D L, 319D, 323D L, 323D LN, 324D, 324D L, 324D LN, 325C, 325D, 325D L, 329D L, 330C L, 330D, 330D L, 330D LN, 330D MH, 336D L, 336D LN, 345C, 345C L, 345D, 345D L, 365C, 365C L, 365C L MH, 37...
312D, 315D L, 319D, 323D L, 323D LN, 324D, 324D L, 324D LN, 325C, 325D, 325D L, 329D L, 330C L, 330D, 330D L, 330D LN, 330D MH, 336D L, 336D LN, 345C, 345C L, 345D, 345D L, 365C, 365C L, 365C L MH, 37...