2358922 COVER Caterpillar parts
311D LRR, 311F LRR, 312D, 312D L, 312D2, 312D2 GC, 313D, 313D2, 315D L, 318D L, 318D2 L, 319D L, 320D, 320D FM, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 320D2, 320D2 L, 323D L, 324D, 324D L, 325D,...
Rating:
Alternative (cross code) number:
CA2358922
235-8922
2358922
CA2358922
235-8922
2358922
Weight: 0.52 pounds 0 kg.
EXCAVATOR, WHEELED EXCAVATOR,
Compatible equipment models: 2358922:
EXCAVATOR
311D LRR
311F LRR
312D
312D L
312D2
312D2 GC
313D
313D2
315D L
318D L
318D2 L
319D L
320D
320D FM
320D GC
320D L
320D LN
320D LRR
320D RR
320D2
320D2 L
323D L
324D
324D L
325D
325D L
325D MH
329D
329D L
330D
330D L
330D MH
336D
336D L
336D2
340D L
345C
345C L
345C MH
345D
345D L
349D
349D L
Number on catalog scheme:
34
For full view, you need register
Information:
harness is OK. - Proceed to Test Step 2.
Not OK - Repair: Repair the faulty connectors or the harness and/or replace the faulty connectors or the harness. Ensure that all of the seals are correctly in place and ensure that the connectors are correctly coupled.If the primary speed/timing sensor must be replaced or the sensor must be reinstalled, refer to Disassembly and Assembly, "Crankshaft Position Sensor - Remove and Install". If the secondary speed/timing sensor must be replaced or the sensor must be reinstalled, refer to Disassembly and Assembly, "Camshaft Position Sensor - Remove and Install".Use the electronic service tool in order to clear all logged diagnostic codes and then verify that the repair has eliminated the fault.STOPTest Step 2. Check for Active Diagnostic Codes and Recently Logged Diagnostic Codes
Turn the keyswitch to the OFF position.
Connect the electronic service tool to the diagnostic connector.
Turn the keyswitch to the ON position. If the engine will start, then run the engine.
Use the electronic service tool in order to monitor active diagnostic codes or recently logged diagnostic codes. Results:
Diagnostic code 190-8 is active or recently logged. - Proceed to Test Step 5.
Diagnostic code 342-8 is active or recently logged. - Proceed to Test Step 5.
Diagnostic code 261-11 is active or recently logged. - Proceed to Test Step 3.
No active diagnostic codes or recently logged diagnostic codes are displayed. -
STOPTest Step 3. Inspect the Sensors
Ensure that the speed/timing sensors are correctly seated in the cylinder block and that the retaining bolts are tightened to a torque of 22 N m (16 lb ft). Ensure that the speed/timing sensors are not damaged. Replace any damaged sensors. Refer to Disassembly and Assembly, "Crankshaft Position Sensor - Remove and Install" or refer to Disassembly and Assembly, "Camshaft Position Sensor - Remove and Install".
Use the electronic service tool to check if the 261-11 diagnostic code is still active.Results:
A 261-11 diagnostic code is still active at this time. - Proceed to Test Step 4.
A 261-11 diagnostic code is not active at this time. - Use the electronic service tool to clear all logged diagnostic codes and verify that the repair eliminates the fault.STOPTest Step 4. Check the Crankshaft Timing Ring and the Timing Ring on the Camshaft
Remove the primary speed/timing sensor and the secondary speed/timing sensor. Refer to Disassembly and Assembly, "Crankshaft Position Sensor - Remove and Install" or refer to Disassembly and Assembly, "Camshaft Position Sensor - Remove and Install".
Use a flashlight in order to check the timing ring on the camshaft through the camshaft timing hole for damage.
Use a flashlight in order to check the crankshaft timing ring for damaged teeth or missing teeth. Ensure that the crankshaft timing ring has not been displaced from the crankshaft.Results:
Found fault with the crankshaft timing ring or the timing ring on the camshaft - Repair: If necessary, replace the camshaft. Refer to Disassembly and Assembly, "Camshaft - Remove" and refer to Disassembly and Assembly, "Camshaft - Install".If necessary, replace the crankshaft timing ring. Refer to Disassembly and Assembly,
Not OK - Repair: Repair the faulty connectors or the harness and/or replace the faulty connectors or the harness. Ensure that all of the seals are correctly in place and ensure that the connectors are correctly coupled.If the primary speed/timing sensor must be replaced or the sensor must be reinstalled, refer to Disassembly and Assembly, "Crankshaft Position Sensor - Remove and Install". If the secondary speed/timing sensor must be replaced or the sensor must be reinstalled, refer to Disassembly and Assembly, "Camshaft Position Sensor - Remove and Install".Use the electronic service tool in order to clear all logged diagnostic codes and then verify that the repair has eliminated the fault.STOPTest Step 2. Check for Active Diagnostic Codes and Recently Logged Diagnostic Codes
Turn the keyswitch to the OFF position.
Connect the electronic service tool to the diagnostic connector.
Turn the keyswitch to the ON position. If the engine will start, then run the engine.
Use the electronic service tool in order to monitor active diagnostic codes or recently logged diagnostic codes. Results:
Diagnostic code 190-8 is active or recently logged. - Proceed to Test Step 5.
Diagnostic code 342-8 is active or recently logged. - Proceed to Test Step 5.
Diagnostic code 261-11 is active or recently logged. - Proceed to Test Step 3.
No active diagnostic codes or recently logged diagnostic codes are displayed. -
STOPTest Step 3. Inspect the Sensors
Ensure that the speed/timing sensors are correctly seated in the cylinder block and that the retaining bolts are tightened to a torque of 22 N m (16 lb ft). Ensure that the speed/timing sensors are not damaged. Replace any damaged sensors. Refer to Disassembly and Assembly, "Crankshaft Position Sensor - Remove and Install" or refer to Disassembly and Assembly, "Camshaft Position Sensor - Remove and Install".
Use the electronic service tool to check if the 261-11 diagnostic code is still active.Results:
A 261-11 diagnostic code is still active at this time. - Proceed to Test Step 4.
A 261-11 diagnostic code is not active at this time. - Use the electronic service tool to clear all logged diagnostic codes and verify that the repair eliminates the fault.STOPTest Step 4. Check the Crankshaft Timing Ring and the Timing Ring on the Camshaft
Remove the primary speed/timing sensor and the secondary speed/timing sensor. Refer to Disassembly and Assembly, "Crankshaft Position Sensor - Remove and Install" or refer to Disassembly and Assembly, "Camshaft Position Sensor - Remove and Install".
Use a flashlight in order to check the timing ring on the camshaft through the camshaft timing hole for damage.
Use a flashlight in order to check the crankshaft timing ring for damaged teeth or missing teeth. Ensure that the crankshaft timing ring has not been displaced from the crankshaft.Results:
Found fault with the crankshaft timing ring or the timing ring on the camshaft - Repair: If necessary, replace the camshaft. Refer to Disassembly and Assembly, "Camshaft - Remove" and refer to Disassembly and Assembly, "Camshaft - Install".If necessary, replace the crankshaft timing ring. Refer to Disassembly and Assembly,
Cat SIS web machinery list:
Parts cover Caterpillar catalog:
24M, 2864C, 3406C, 345B II, 345B L, 345C, 345C L, 345C MH, 345D, 345D L, 345D L VG, 349D, 349D L, 349E, 349E L, 349E L HVG, 349E L VG, 349F L, 586C, 730C, 735, 735B, 740, 740B, AD60, C13 XQ350, C9, TK...
14M, 16M, 345C, 345C L, 345C MH, 345D, 345D L, 345D L VG, 349D, 349D L, 349E, 349E L, 349E L HVG, 349E L VG, 349F L, 621H, 621K, 623H, 623K, 623K LRC, 627H, 627K, 627K LRC, 725, 730, 730C, 966H, 972H,...
14M, 16M, 345C, 345C L, 345C MH, 345D, 345D L, 345D L VG, 349D, 349D L, 725, 730, 966H, 972H, 980C, C11, C13, CX31-C13I, D8N, R1600H, R1700G, RM-300, TH35-C11I, TH35-C13I, W345C MH
311, 311B, 311C, 312, 312B, 315, 315B L, 315C, 315D L, 316E L, 317, 317B LN, 318B, 318C, 318D L, 318D2 L, 318E L, 319C, 319D, 319D L, 319D LN, 320 L, 320B, 320C, 320C L, 320D, 320D FM, 320D GC, 320D L...
311, 311B, 312, 312B, 313D2 LGP, 315, 315B, 315B FM L, 315B L, 315C, 315D L, 316E L, 317, 317B LN, 318B, 318C, 318D L, 318D2 L, 318E L, 319C, 319D, 319D L, 319D LN, 320 L, 320B, 320B L, 320C, 320C L, ...
315C, 315D L, 318B, 318C, 318E L, 319C, 319D, 319D L, 319D LN, 320 L, 320B, 320C, 320C FM, 320C L, 320D, 320D FM, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 320D2, 320D2 GC, 320D2 L, 320E, 320E L, 3...
307C, 307D, 311C, 311D LRR, 311F LRR, 312C L, 312D, 312D L, 312D2, 312D2 GC, 313D, 313D2, 315C, 315D L, 318C, 318D L, 318D2 L, 319D L, 320C, 320C FM, 320C L, 320D, 320D FM, 320D GC, 320D L, 320D LN, 3...
311C, 311D LRR, 312C, 312C L, 312D, 312D L, 313D, 314C, 314D CR, 314D LCR, 315D L, 318C, 318D L, 319C, 319D, 319D L, 319D LN, 320C, 320C FM, 320C L, 320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN...
318C, 319C, 320 L, 320B, 320C, 320C FM, 320C L, 320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 321C, 321D LCR, 323D L, 323D LN, 323D SA
312D, 320B, 320C, 323D LN, 323D SA, 323E L, 325, 325 L, 325 LN, 325B, 325B L, 325C, 325D, 325D L, 325D MH, 328D LCR, 329D, 329D L, 329D LN, 329E, 329E L, 329E LN, 330, 330 FM L, 330 L, 330B L, 330C, 3...
320C, 320C FM, 320D, 320D FM, 320D FM RR, 322C, 322C FM, 323D LN, 323D SA, 323E L, 324D, 324D L, 324D LN, 324E, 324E L, 324E LN, 325C, 325C FM, 325D, 325D L, 325D MH, 326D L, 329D, 329D L, 329D LN, 32...
322C, 324D, 324D L, 324D LN, 324E, 324E L, 324E LN, 326D L
2346550
COVER
311D LRR, 311F LRR, 312D, 312D L, 312D2, 312D2 GC, 313D, 313D2, 315D L, 318D L, 318D2 L, 319D L, 320D, 320D FM, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 320D2, 320D2 L, 323D L, 324D, 324D L, 325D,...
311D LRR, 311F LRR, 312D, 312D L, 312D2, 312D2 GC, 313D, 313D2, 315D L, 318D L, 318D2 L, 319D L, 320D, 320D FM, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 320D2, 320D2 L, 323D L, 324D, 324D L, 325D,...
2346549
COVER
311D LRR, 311F LRR, 312D, 312D L, 312D2, 312D2 GC, 313D, 313D2, 315D L, 318D L, 318D2 L, 319D L, 320D, 320D FM, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 320D2, 320D2 L, 323D L, 324D, 324D L, 325D,...
311D LRR, 311F LRR, 312D, 312D L, 312D2, 312D2 GC, 313D, 313D2, 315D L, 318D L, 318D2 L, 319D L, 320D, 320D FM, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 320D2, 320D2 L, 323D L, 324D, 324D L, 325D,...
2346548
COVER
311D LRR, 311F LRR, 312D, 312D L, 312D2, 312D2 GC, 313D, 313D2, 315D L, 318D L, 318D2 L, 319D L, 320D, 320D FM, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 320D2, 320D2 L, 323D L, 324D, 324D L, 325D,...
311D LRR, 311F LRR, 312D, 312D L, 312D2, 312D2 GC, 313D, 313D2, 315D L, 318D L, 318D2 L, 319D L, 320D, 320D FM, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 320D2, 320D2 L, 323D L, 324D, 324D L, 325D,...
2346547
COVER
311D LRR, 311F LRR, 312D, 312D L, 312D2, 312D2 GC, 313D, 313D2, 315D L, 318D L, 318D2 L, 319D L, 320D, 320D FM, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 320D2, 320D2 L, 323D L, 324D, 324D L, 325D,...
311D LRR, 311F LRR, 312D, 312D L, 312D2, 312D2 GC, 313D, 313D2, 315D L, 318D L, 318D2 L, 319D L, 320D, 320D FM, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 320D2, 320D2 L, 323D L, 324D, 324D L, 325D,...
2346521
COVER
311D LRR, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 313D, 313D2, 313D2 LGP, 315D L, 318D L, 318D2 L, 319D L, 320D, 320D FM, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 320D2, 320D2 GC, 320D2 L, 323D L,...
311D LRR, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 313D, 313D2, 313D2 LGP, 315D L, 318D L, 318D2 L, 319D L, 320D, 320D FM, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 320D2, 320D2 GC, 320D2 L, 323D L,...
2346497
COVER
311D LRR, 311F LRR, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 313D, 313D2, 313D2 LGP, 315D L, 318D L, 318D2 L, 319D, 319D L, 319D LN, 320D, 320D FM, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 320D2, 3...
311D LRR, 311F LRR, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 313D, 313D2, 313D2 LGP, 315D L, 318D L, 318D2 L, 319D, 319D L, 319D LN, 320D, 320D FM, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 320D2, 3...
315D L, 318E L, 319D L, 319D LN, 320C, 320D, 320D FM, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 320D2, 320D2 GC, 320D2 L, 320E, 320E L, 320E LN, 320E LRR, 320E RR, 321D LCR, 322C, 322C FM, 323D L, ...
2346502
COVER-ACCESS
311D LRR, 311F LRR, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 313D, 313D2, 313D2 LGP, 315D L, 318D L, 318D2 L, 319D, 319D L, 319D LN, 320D, 320D FM, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 320D2, 3...
311D LRR, 311F LRR, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 313D, 313D2, 313D2 LGP, 315D L, 318D L, 318D2 L, 319D, 319D L, 319D LN, 320D, 320D FM, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 320D2, 3...
2346499
COVER AS
311D LRR, 311F LRR, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 313D, 313D2, 313D2 LGP, 315D L, 318D L, 318D2 L, 319D, 319D L, 319D LN, 320D, 320D FM, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 320D2, 3...
311D LRR, 311F LRR, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 313D, 313D2, 313D2 LGP, 315D L, 318D L, 318D2 L, 319D, 319D L, 319D LN, 320D, 320D FM, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 320D2, 3...
1892854
COVER
311D LRR, 311F LRR, 312D, 312D2, 312D2 GC, 312D2 L, 313D, 313D2, 313D2 LGP, 315D L, 318D L, 318D2 L, 320C, 320D, 320D GC, 320D L, 320D LRR, 320D2, 320D2 GC, 320D2 L, 323D L, 323D2 L, 324D, 325C, 325D,...
311D LRR, 311F LRR, 312D, 312D2, 312D2 GC, 312D2 L, 313D, 313D2, 313D2 LGP, 315D L, 318D L, 318D2 L, 320C, 320D, 320D GC, 320D L, 320D LRR, 320D2, 320D2 GC, 320D2 L, 323D L, 323D2 L, 324D, 325C, 325D,...
1892853
COVER
311D LRR, 311F LRR, 312D, 312D2, 312D2 GC, 312D2 L, 313D, 313D2, 313D2 LGP, 315D L, 318D L, 318D2 L, 320C, 320D, 320D GC, 320D L, 320D LRR, 320D2, 320D2 GC, 320D2 L, 323D L, 323D2 L, 324D, 325C, 325D,...
311D LRR, 311F LRR, 312D, 312D2, 312D2 GC, 312D2 L, 313D, 313D2, 313D2 LGP, 315D L, 318D L, 318D2 L, 320C, 320D, 320D GC, 320D L, 320D LRR, 320D2, 320D2 GC, 320D2 L, 323D L, 323D2 L, 324D, 325C, 325D,...
2346469
COVER
311D LRR, 311F LRR, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 313D, 313D2, 313D2 LGP, 315D L, 318D L, 318D2 L, 319D L, 319D LN, 320D, 320D FM, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 320D2, 320D2 G...
311D LRR, 311F LRR, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 313D, 313D2, 313D2 LGP, 315D L, 318D L, 318D2 L, 319D L, 319D LN, 320D, 320D FM, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 320D2, 320D2 G...