AVSPARE.COM
parts catalog

COVER AS 2444128 - Caterpillar


2444128 COVER AS Caterpillar parts
Rating:
41
Alternative (cross code) number:
CA2444128
244-4128
2444128
Caterpillar 2444128 COVER AS

Buy COVER AS 2444128 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register

Information:


Table 2
Parts Required to Update the Drive Shaft Guard Group    
Item     Qty     Part Number     Description    
11     1     362-1136     Bracket As    
12     6     7C-0100     Flexible Mounts    
13     1     7X-3186     Bolt    
14     1     8T-4896     Hard Washer    
15     3     145-5181     Spacers    
16     4     3D-0472     Taperlock Studs    
17     1     362-1140     Plate As    
18     1     362-1138     Plate    
19     1     362-1135     Guard    
20     6     6V-8189     Nuts    
21     6     5P-4116     Hard Washers    
22     1     326-9055     Film    Procedure to Update Drive Shaft Guard Group
Illustration 1 g02480977
Illustration 2 g02480978
Detail of area A
Remove bolts (3), bolts (1), hard washers (4), hard washers (2) and discard the parts.
Remove guard assembly (6), guard (5) and discard the parts.
Illustration 3 g02483736
Remove full nuts (9), hard washers (10) and retain the parts.
Remove taperlock studs (8) and discard the parts.
Remove plate assembly (7) and discard the part.
Illustration 4 g02483737
Install four taperlock studs (16) to the adapter assembly.
Assemble three spacers (15), one bracket assembly (11) to appropriate taperlock studs (16) with four hard washers (10), four full nuts (9) as shown in Illustration 4. Use full nuts (9) and hard washers (10) that were retained in Step 3.
Install plate (18) to the pump drive housing with one plate assembly (17), one hard washer (14) and one bolt (13) as shown in Illustration 4.
Install four flexible mounts (12) to bracket assembly (11) and two flexible mounts (12) to plate assembly (17) as shown in Illustration 4.
Illustration 5 g02483738
Install guard (19) with six hard washers (21) and six nuts (20). Tighten the nuts. Install film (22) over guard (19). Refer to Illustration 5.


Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.