COVER AS-RADIATOR 2558503 - Caterpillar

Removal Procedure
Start By:
Remove bottom guards. Refer to Disassembly and Assembly, "Bottom Guards - Remove and Install".
Connect the steering frame lock. Refer to Disassembly and Assembly, "Steering Frame Lock - Separate and Connect".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products.Dispose of all fluids according to local regulations and mandates.
Note: Put identification marks on all lines, on all hoses, on all wires, and on all tubes for installation purposes. Plug all lines, hoses, and tubes. This helps to prevent fluid loss and this helps to keep contaminants from entering the system.
Illustration 1 g01419309
Disconnect harness assembly (1). Remove plug (7) and drain filter housing (5) into a suitable container for storage or disposal. Remove filter housing (5).
Disconnect hose assembly (8). Disconnect tube assembly (6). Remove cable straps (4). Remove bolts (2). Remove filter base (3).
Illustration 2 g01419207
Remove filter element (9) from filter housing (5).