COVER-WATER PUMP 2740004 - Caterpillar

Illustration 6 g01731873
Illustration 7 g01731915
Use Tooling (A) to install front wheel, brake, and suspension cylinder (20). The weight of front wheel, brake, and suspension cylinder (20) is approximately 3574 kg (7880 lb).
Illustration 8 g01732115
Illustration 9 g06282794
Install new bolts (22). Install new bolts (21). Repeat this step for the opposite side of suspension cylinder (20).
Position Tooling (B) as shown in Illustration 9 to support front wheel, brake, and suspension cylinder (20). Refer to Tool Operating Manual , NEHS1303, "Lift Group (Stand - 25 Ton)" for more information on Tooling (B).
Tighten bolts (22) to a torque of 2700 275 N m (1991 203 lb ft). Tighten bolts (21) to a torque of 1825 175 N m (1346 129 lb ft).
Illustration 10 g01731873
Remove Tooling (A) from front wheel, brake, and suspension cylinder (20).
Illustration 11 g01730413
Install shims (19). Install bolts (18).
Illustration 12 g01730375
Install clips (17). Connect grease hose assembly (16).
Illustration 13 g01730333
Connect harness assembly (15).
Illustration 14 g01730313
Connect hose assembly (14).
Illustration 15 g01730293
Install blocks (13) and bolts (12). Connect hose assembly (11).
Illustration 16 g01730274
Connect hose assembly (10).
Illustration 17 g01730234
Position bracket (9). Connect hose assemblies (8) and hose assembly (7).
Illustration 18 g01730197
Illustration 19 g01730113
Use a suitable lifting device to position steering arm (6), steering link (3), and steering cylinder assembly (2). The weight of steering arm (6), steering link (3), and steering cylinder assembly (2) is approximately 362 kg (800 lb).
Install bolts (5). Connect grease hose assemblies (4).
Personal injury or death can result from air in the oil for the brake hydraulic system.Air in the system can prevent complete brake application and it is possible that the wheels on the machine can not be stopped.Air must not be in the oil for the brake hydraulic system to function properly.
Remove the air from the service and parking brakes. Refer to Testing and Adjusting, "Brake System Air - Purge".
Fill the hydraulic tank. Refer to Operation and Maintenance Manual, "Hoist, Torque Converter and Brake Tank Oil - Change".
Charge the suspension cylinder. Refer to Testing and Adjusting, "Suspension Cylinder (Front) - Purge and Charge". End By:
Install the front tire and rim.