COVER AS 2751790 - Caterpillar

Illustration 1 g03826875
Typical example
Table 1
Specification for 310-7364 Final Drive and Parking Brake Gp and 310-7365 Final Drive and Parking Brake Gp
Item Qty Part Specification Description
1 3 6V-0439 Magnetic Plug Torque to 280 50 N m (207 37 lb ft).
2 - 6V-5765 Sealant Apply sealant to the case only in continuous bead 3 mm (0.1 inch) from inside diameter.
Clean all sealing surfaces prior to applying the sealant.
3 6 287-3585 Bolt Torque to 570 80 N m (420 59 lb ft).
4 9 6V-3823 Bolt Torque to 120 20 N m (89 15 lb ft).
5 1 440-4292 Duo-Cone Seal Gp All the surfaces that are contacting the rubber toric seals must be clean and dry at assembly. Before assembly, apply a thin film of oil to the contacting surfaces of the metal seal rings. The seal rings must be assembled square with the bore and with the toric seal. The seal rings must not have bulges or twists.
Refer to Special Instruction, SEHS8364-03, "Assembly and Installation of Conventional Duo-Cone Seals" for installation instructions.
6 2 5F-0589 Bearing Cup Before installation, lubricate with SAE 30 oil.
7 1 5P-4921 Bearing Outer Race Before installation, lubricate with SAE 30 oil.
8 29 8T-4140 Bolt Torque to 300 40 N m (221 30 lb ft).
9 1 3W-5928 Seal As Lubricate the bore lightly with the lubricant that is being sealed.
10 1 8T-6379 Seal As Lubricate the bore lightly with the lubricant that is being sealed.
11 Thickness of five new friction discs and four new parking brake plates for the brake is 29.20 1.12 mm (1.150 0.044 inch).
Before assembly, dip the parts in the SAE 30 oil.
5 170-8714 Friction Disc Thickness of one new friction disc is 4.00 0.12 mm (0.157 0.005 inch).
4 3W-5159 Parking Brake Plate Thickness of one new parking brake plate is 2.30 0.13 mm (0.091 0.005 inch).