COVER 2P1950 - Caterpillar

Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 145-5242 Puller 1 Start By:
Connect the steering frame lock.
Illustration 1 g00451503
Remove horn button (1) from steering wheel (2). If necessary, use a screwdriver to pry off the horn button.
Illustration 2 g00451504
Disconnect harness assembly (5) from horn button (1). Note: Mark the position of lever (6) for assembly purposes.
Remove nut (3), spacer (4), and lever (6).
Illustration 3 g00842667
Remove bolts (8). Slide shroud (7) down the steering column.
Illustration 4 g00451506
Illustration 5 g00451507
Loosen retaining nut (9). Note: Mark the position of the steering wheel for assembly purposes.
Use Tooling (A) to loosen steering wheel (2). Remove retaining nut (9).
Illustration 6 g00451508
Lift steering wheel (2).
Disconnect harness assembly (10) and harness assembly (11).
Remove steering wheel (2). Installation Procedure
Illustration 7 g00451508
Support steering wheel (2).
Connect harness assembly (11) and harness assembly (10).
Illustration 8 g00451506
Install steering wheel (2) in the original position.
Install retaining nut (9). The torque for retaining nut (9) is 50 4 N m (37 3 lb ft).
Illustration 9 g00842667
Slide shroud (7) to the original position. Install bolts (8).
Illustration 10 g00451504
Install lever (6) in the original position. Install spacer (4) and nut (3).
Connect harness assembly (5) to horn button (1).
Illustration 11 g00451503
Install horn button (1) on steering wheel (2). End By:
Separate the steering frame lock.