2P6834 COVER Caterpillar parts
518, 824B
Rating:
Alternative (cross code) number:
CA2P6834
2P-6834
2P6834
CA2P6834
2P-6834
2P6834
Weight: 0.30 pounds 0 kg.
Information:
BOLT HOLE DIAMETER/THREAD
8.74
mm
BOLT PATTERN LENGTH
73.46
mm
BOLT PATTERN WIDTH
17.27
mm
COVER THICKNESS
6.1
mm
DASH SIZE
0
TYPE
PLAIN
WHEEL DOZER, WHEEL SKIDDER,
Number on catalog scheme:
3
For full view, you need register
Information:
Removal Procedure
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01207622
Disconnect harness assembly (3).
Remove bolt (1) and camshaft position sensor (2).
Remove the O-ring seal from camshaft position sensor (2). Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 2 g01207622
Install a new O-ring seal on camshaft position sensor (2). Lubricate the O-ring seal with clean engine oil.
Position camshaft position sensor (2) in the front housing and install bolt (1). Tighten bolt (1) to a torque of 28 7 N m (21 5 lb ft).
Connect harness assembly (3).
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01207622
Disconnect harness assembly (3).
Remove bolt (1) and camshaft position sensor (2).
Remove the O-ring seal from camshaft position sensor (2). Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 2 g01207622
Install a new O-ring seal on camshaft position sensor (2). Lubricate the O-ring seal with clean engine oil.
Position camshaft position sensor (2) in the front housing and install bolt (1). Tighten bolt (1) to a torque of 28 7 N m (21 5 lb ft).
Connect harness assembly (3).
Caterpillar parts catalog:
Parts cover Caterpillar catalog:
120B, 120G, 12G, 12H, 12H ES, 12H NA, 130G, 140B, 140G, 140H, 140H ES, 140H NA, 143H, 14G, 14H NA, 160G, 160H, 160H ES, 160H NA, 163H NA, 1673C, 215, 215B, 215C, 225, 235, 235B, 330, 330 L, 3304, 3304...
120G, 12G, 12H, 12H ES, 12H NA, 130G, 140B, 140G, 140H, 140H ES, 140H NA, 143H, 14G, 14H NA, 160G, 160H, 160H ES, 160H NA, 163H NA, 1673C, 215, 215B, 235B, 330, 330 FM L, 330 L, 3304, 3304B, 3306, 330...
16G, 16H NA, 245, 245B, 24H, 24M, 3176B, 3176C, 3196, 3204, 3304, 3304B, 3306, 3306B, 3406, 3406B, 3406C, 3406E, 3408, 3408B, 3408C, 3408E, 3412, 3412C, 3412D, 3412E, 3456, 3508, 3508B, 3508C, 3512, 3...
16, 1693, 3512, 583H, 583K, 631C, 651, 657, 657B, 666, 824, 824B, 983, 988, D326F, D337F, D342, D342C, D343, D353C, D8H, D8K, D9H, G343, G3508, G3512, G3516, G3516B, G3520B, PMG3516
16, 1693, 631C, 657, 657B, 769, 824B, 825B, 834, 988, D343
120G, 518, 528, 920, 930, 950, 950B, D6C, G936
215, 613B, 613C, 613C II, 651, 768B, 769, 769C, 769D, 771C, 771D, 772, 772B, 773, 773B, 773D, 775B, 775D, 776C, 776D, 777, 777B, 777D, 784B, 784C, 785, 785B, 785C, 785D, 789, 789B, 789C, 789D, 793B, 7...
12F, 140, 141, 14E, 153, 16, 163, 172, 191, 518, 518C, 816, 941, 951B, D5B, D5E, D6D, D6E, D6E SR
16, 172, 173B, 183B, 528, 528B, 530B, 561H, 561M, 613, 613B, 613C, 613C II, 621, 631C, 633C, 633D, 641, 641B, 650B, 651, 651E, 657E, 657G, 666, 824B, 825B, 834, 916, 920, 926, 930, 930R, 988, D250B, D...
153, 163, 172, 173B, 183B, 650B, 814, 815, 824, 824B, 824S, 834, 950, 955H, 966C, 966R, 977H, 977K, 980B, 983, 983B, D7F
518, 528, 528B, 530B, 613C, 613C II, 613G, 725, 725C, 730, 730C, 769C, 773B, 916, 936, 950, 950B, 950B/950E, D250D, D250E, D250E II, D300B, D300D, D300E, D300E II, G936
518, 930, 930R
120G, 518, 528, 920, 930, 950, 950B, D6C, G936
120G, 518, 528, 920, 930, 950, 950B, D6C, G936
5C8557
COVER ASSEM.
215, 215B, 215C
215, 215B, 215C
7K0711
COVER
225
225
7V0711
COVER
225
225
5M1669
COVER
583K, 977D, 977H, 983, D8H, D8K, D9E, D9G, D9H
583K, 977D, 977H, 983, D8H, D8K, D9E, D9G, D9H
8K2406
COVER
235, 245
235, 245
9J4139
COVER
245
245
7M7390
COVER ASSEM.
120B, 12E, 12F, 140B, 14E, D6C
120B, 12E, 12F, 140B, 14E, D6C