COVER 3113642 - Caterpillar

Monitoring System
Illustration 1 g03362842
Illustration 2 g03362844
Your machine will have one of the above monitoring system displays.
The monitoring system (1) is located in the operator console.Reference: For information regarding the monitoring system, refer to the Systems Operations and the "Operation Maintenance Manual" for your machine.Control Manifold (Hydraulic Fan)
Illustration 3 g06216335
View of the control manifold as seen from below the machine.
The control manifold (2) is on the right side of the machine. The control manifold (2) is above a belly guard and in front of the front axle. This manifold is the same manifold that is used for the brake system.
Control Manifold (Hydraulic Fan)
Illustration 4 g06216695
(2) Hydraulic fan and brake control manifoldThe hydraulic fan solenoid gp is on the brake and hydraulic control manifold (2).Piston Pump Hydraulic Fan
Illustration 5 g06216697
View of the rear of the tractor
(4) Piston pumpThe piston pump (4) is connected to an output shaft of the transmission.Pump Control Valve
Illustration 6 g03686764
View of the rear of the tractor
(3) Pump control group
(4) Fan pumpThe pump control valve (3) is on the side of the piston pump (4).Oil Filter Gp (Hydraulic Fan)
Illustration 7 g06216703
View of the rear of the tractor
The filter for the hydraulic fan system is on the rear of the tractor. The temperature sensor is on the top of the filter.Piston Motor (Hydraulic Fan)
Illustration 8 g03418189
View of the fan motor
The piston motor (hydraulic fan) (5) is part of the cooling group. The piston motor (hydraulic fan) (5) is on the rear of the cooling package. The speed sensor is on the right side of the piston motorOil Cooler (Hydraulic System)
Illustration 9 g03717760
Front view of the cooling package
Oil cooler (brake and hydraulic fan) (6) is located in front of the radiator group. Oil flows from the piston motor (hydraulic fan) through the cooler. The oil flows through the return filter and into the hydraulic tank.