3202677 COVER Caterpillar parts
330C, 330D L, 330D MH, 345B, 345B II, 345B II MH, 345B L, 345C, 345C L, 345C MH, 345D, 345D L, 345D L VG, 349D, 349D L, 349E, 349E L, 349E L HVG, 349E L VG, 349F L, 365B, 365B II, 365C, 365C L, 365C L...
Rating:
Alternative (cross code) number:
CA3202677
320-2677
3202677
CA3202677
320-2677
3202677
Weight: 4 pounds 1 kg.
EXCAVATOR, MOBILE HYD POWER UNIT,
Compatible equipment models: 3202677:
Number on catalog scheme:
7
For full view, you need register
Information:
Assembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1P-1857 Retaining Ring Pliers 1
B 1U-6683 Ring Expander 1
C 1P-0510 Driver Gp 1
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
If the piston pin bushing was removed, use a suitable press and Tooling (C) to install a new piston pin bushing into connecting rod (1). Note: Lubricate all components with clean engine oil.
Illustration 1 g00829406
Typical example
Note: Refer to Specifications, "Pistons and Rings" for more information on piston identification.
Use the following procedure with Tooling (B) to install piston rings on piston (2).
Illustration 2 g00836010
Typical example
Illustration 3 g01128283
Typical example
Install oil control piston ring (7) in the groove that is lowest on the piston. The latch pin (9) that is on the oil control ring (7) must be inside the ends of spring (10). Note: Ensure that the latch pin that is on the oil control ring is 180 degrees from the oil control ring gap.
Illustration 4 g01038129
Typical example
Install the intermediate piston ring (6) with the tapered face into the second groove on the piston. The step (Y) must be toward the top of the piston.
Install the top piston ring (5) with the barrel and the molybdenum insert into the top groove on the piston. The scribe mark must be toward the top of the piston.
Position the piston ring gaps at 90 degrees away from each other.
Illustration 5 g01038130
Typical example
Align identification marks (Z) on connecting rod (1) and piston (2). Note: The Shibaura name inside the piston must align with the stamped number on the connecting rod.
Install piston pin (3) into piston (2) and connected rod (1). Note: If the piston pin cannot be installed by hand, heat the piston to a temperature of 45 5 °C (113 9 °F). Do not use a oxyacetylene torch to heat the piston. Mark the piston pin for installation.
Use Tooling (A) to install two retaining rings (4).
Illustration 6 g01128280
Typical example
Install the bearing shells (13) to the connecting rod (1) and the connecting rod cap (12).
Install the connecting rod cap (12) and the connecting rod nuts (11) to the connecting rod (1). End By:
Install the pistons and the connecting rods. Refer to Disassembly and Assembly, "Piston and Connecting Rods - Install".
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1P-1857 Retaining Ring Pliers 1
B 1U-6683 Ring Expander 1
C 1P-0510 Driver Gp 1
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
If the piston pin bushing was removed, use a suitable press and Tooling (C) to install a new piston pin bushing into connecting rod (1). Note: Lubricate all components with clean engine oil.
Illustration 1 g00829406
Typical example
Note: Refer to Specifications, "Pistons and Rings" for more information on piston identification.
Use the following procedure with Tooling (B) to install piston rings on piston (2).
Illustration 2 g00836010
Typical example
Illustration 3 g01128283
Typical example
Install oil control piston ring (7) in the groove that is lowest on the piston. The latch pin (9) that is on the oil control ring (7) must be inside the ends of spring (10). Note: Ensure that the latch pin that is on the oil control ring is 180 degrees from the oil control ring gap.
Illustration 4 g01038129
Typical example
Install the intermediate piston ring (6) with the tapered face into the second groove on the piston. The step (Y) must be toward the top of the piston.
Install the top piston ring (5) with the barrel and the molybdenum insert into the top groove on the piston. The scribe mark must be toward the top of the piston.
Position the piston ring gaps at 90 degrees away from each other.
Illustration 5 g01038130
Typical example
Align identification marks (Z) on connecting rod (1) and piston (2). Note: The Shibaura name inside the piston must align with the stamped number on the connecting rod.
Install piston pin (3) into piston (2) and connected rod (1). Note: If the piston pin cannot be installed by hand, heat the piston to a temperature of 45 5 °C (113 9 °F). Do not use a oxyacetylene torch to heat the piston. Mark the piston pin for installation.
Use Tooling (A) to install two retaining rings (4).
Illustration 6 g01128280
Typical example
Install the bearing shells (13) to the connecting rod (1) and the connecting rod cap (12).
Install the connecting rod cap (12) and the connecting rod nuts (11) to the connecting rod (1). End By:
Install the pistons and the connecting rods. Refer to Disassembly and Assembly, "Piston and Connecting Rods - Install".
Cat SIS web machinery list:
Parts cover Caterpillar catalog:
140H, 143H, 14H, 160H, 163H, 16H, 3176C, 3196, 345B, 345B II, 345B II MH, 345B L, 365B, 365B II, 365B L, 480, 572R II, 65E, 725, 730, 75E, 814F, 815F, 816F, 85E, 95E, 966G II, 972G II, C-10, C-12, C12...
120H, 120M 2, 12H, 135H, 140H, 143H, 14H, 160H, 163H, 16H, 3126, 3126B, 3126E, 3176C, 3196, 3406E, 345B, 345B II, 345B II MH, 345B L, 365C, 365C L, 365C L MH, 374D L, 385B, 385C, 385C FS, 385C L, 385C...
2290, 2390, 2391, 2491, 2590, 330C, 330C FM, 330C L, 330C MH, 330D, 330D FM, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 336D2, 336D2 L, 340D L, 340D2 L, 511, 521, 521B, 522, 522B, 532, 541, 541 ...
2290, 2390, 2391, 2491, 2590, 330C, 330C L, 330D, 330D FM, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 336D2, 336D2 L, 340D L, 340D2 L, 511, 521, 521B, 522, 522B, 532, 541, 541 2, 551, 552, 552 2...
12H, 140H, 143H, 14H, 14M, 160H, 163H, 16H, 16M, 24M, 3176B, 3176C, 3196, 330C, 330C FM, 330C L, 330C MH, 330D, 330D FM, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 340D L, 345B, 345B II, 345B II...
24M, 2864C, 3406C, 345B II, 345B L, 345C, 345C L, 345C MH, 345D, 345D L, 345D L VG, 349D, 349D L, 349E, 349E L, 349E L HVG, 349E L VG, 349F L, 586C, 730C, 735, 735B, 740, 740B, AD60, C13 XQ350, C9, TK...
14M, 16M, 345C, 345C L, 345C MH, 345D, 345D L, 345D L VG, 349D, 349D L, 349E, 349E L, 349E L HVG, 349E L VG, 349F L, 621H, 621K, 623H, 623K, 623K LRC, 627H, 627K, 627K LRC, 725, 730, 730C, 966H, 972H,...
14M, 16M, 345C, 345C L, 345C MH, 345D, 345D L, 345D L VG, 349D, 349D L, 725, 730, 966H, 972H, 980C, C11, C13, CX31-C13I, D8N, R1600H, R1700G, RM-300, TH35-C11I, TH35-C13I, W345C MH
311, 311B, 311C, 312, 312B, 315, 315B L, 315C, 315D L, 316E L, 317, 317B LN, 318B, 318C, 318D L, 318D2 L, 318E L, 319C, 319D, 319D L, 319D LN, 320 L, 320B, 320C, 320C L, 320D, 320D FM, 320D GC, 320D L...
307C, 307D, 311C, 311D LRR, 311F LRR, 312C L, 312D, 312D L, 312D2, 312D2 GC, 313D, 313D2, 315C, 315D L, 318C, 318D L, 318D2 L, 319D L, 320C, 320C FM, 320C L, 320D, 320D FM, 320D GC, 320D L, 320D LN, 3...
312D, 320B, 320C, 323D LN, 323D SA, 323E L, 325, 325 L, 325 LN, 325B, 325B L, 325C, 325D, 325D L, 325D MH, 328D LCR, 329D, 329D L, 329D LN, 329E, 329E L, 329E LN, 330, 330 FM L, 330 L, 330B L, 330C, 3...
365B, 365B II, 365B L, 365C, 365C L, 365C L MH, 385B, 385C, 385C FS, 385C L, 385C L MH, 5090B, 776C, 776D, 777D, 854G, 992G, D11N, D11R, D400E II
2543000
COVER AS
385B, 385C, 385C FS, 385C L, 385C L MH, 390D, 390D L, 5090B
385B, 385C, 385C FS, 385C L, 385C L MH, 390D, 390D L, 5090B
2542999
COVER AS
385B, 385C, 385C FS, 385C L, 385C L MH, 390D, 390D L, 5090B
385B, 385C, 385C FS, 385C L, 385C L MH, 390D, 390D L, 5090B
1762258
COVER AS
385B, 385C, 385C FS, 385C L, 390D, 5090B
385B, 385C, 385C FS, 385C L, 390D, 5090B
1762255
COVER AS
385B, 385C, 385C FS, 385C L, 390D, 5090B
385B, 385C, 385C FS, 385C L, 390D, 5090B
1762250
COVER AS
385B, 385C, 385C FS, 385C L, 390D, 5090B
385B, 385C, 385C FS, 385C L, 390D, 5090B
1762249
COVER AS
385B, 385C, 385C FS, 385C L, 390D, 5090B
385B, 385C, 385C FS, 385C L, 390D, 5090B
1529522
COVER
365B, 365B II, 365B L, 365C, 365C L, 365C L MH, 374D L, 385B, 385C, 385C FS, 385C L, 385C L MH, 390D, 390D L, 5090B
365B, 365B II, 365B L, 365C, 365C L, 365C L MH, 374D L, 385B, 385C, 385C FS, 385C L, 385C L MH, 390D, 390D L, 5090B
2426882
COVER
365B, 365B II, 365C, 365C L, 365C L MH, 374D L, 385B, 385C, 385C FS, 385C L, 385C L MH, 390D, 390D L, 5090B
365B, 365B II, 365C, 365C L, 365C L MH, 374D L, 385B, 385C, 385C FS, 385C L, 385C L MH, 390D, 390D L, 5090B
2506967
COVER
345B II, 345B L, 345C, 345C L, 345D L, 345D L VG, 349D, 349D L, 349E L, 349E L HVG, 349E L VG, 365B, 365B II, 365C, 365C L, 365C L MH, 374D L, 374F L, 385B, 385C, 385C FS, 385C L, 385C L MH, 390D, 390...
345B II, 345B L, 345C, 345C L, 345D L, 345D L VG, 349D, 349D L, 349E L, 349E L HVG, 349E L VG, 365B, 365B II, 365C, 365C L, 365C L MH, 374D L, 374F L, 385B, 385C, 385C FS, 385C L, 385C L MH, 390D, 390...
1297815
COVER
345B, 345B II, 345B II MH, 345B L, 365B, 365B II, 365B L, 365C, 365C L, 365C L MH, 374D L, 385B, 385C, 385C FS, 385C L, 385C L MH, 390D, 390D L, 5090B, W345B II
345B, 345B II, 345B II MH, 345B L, 365B, 365B II, 365B L, 365C, 365C L, 365C L MH, 374D L, 385B, 385C, 385C FS, 385C L, 385C L MH, 390D, 390D L, 5090B, W345B II
1298056
COVER
345B, 345B II, 345B II MH, 345B L, 365B, 365B II, 365B L, 365C, 365C L, 365C L MH, 374D L, 385B, 385C, 385C FS, 385C L, 385C L MH, 390D, 390D L, 5090B, W345B II
345B, 345B II, 345B II MH, 345B L, 365B, 365B II, 365B L, 365C, 365C L, 365C L MH, 374D L, 385B, 385C, 385C FS, 385C L, 385C L MH, 390D, 390D L, 5090B, W345B II
1912525
COVER-HOUSING
385B, 385C, 385C FS, 385C L, 385C L MH, 390D, 390D L, 5090B
385B, 385C, 385C FS, 385C L, 385C L MH, 390D, 390D L, 5090B