COVER 3590654 - Caterpillar

Illustration 1 g01197984
Mount the machine and dismount the machine only at locations that have steps and/or handholds. Before you mount the machine, clean the steps and the handholds. Inspect the steps and handholds. Make all necessary repairs.The recommended path to the cab and from the cab is the front of the machine. Use the steps and the handholds on the lift arm. The steps on the track roller frame and the handholds on the cab should be used as a secondary path when the recommended path is not accessible.
Illustration 2 g00037860
Face the machine whenever you get on the machine and whenever you get off the machine.Maintain a three-point contact with the steps and with the handholds.Note: Three-point contact can be two feet and one hand. Three-point contact can also be one foot and two hands.Do not mount a moving machine. Do not dismount a moving machine. Never jump off the machine. Do not carry tools or supplies when you try to mount the machine or when you try to dismount the machine. Use a hand line to pull equipment onto the platform. Do not use any controls as handholds when you enter the operator compartment or when you exit the operator compartment.Steel Mill (Arrangement)
Illustration 3 g01216111
Additional handholds are available to mount the machine from the rear. Also, these handholds are available to dismount the machine toward the rear. Use these handholds as a secondary path when the recommended path is not accessible.Alternate Exit
Machines that are equipped with cabs have alternate exits. Machines that are equipped with cabs have two cab doors. If a cab door is blocked the operator may exit the other cab door.