COVER AS 3591585 - Caterpillar

Illustration 5 g01449344
Remove bolts (10). Position the hose assemblies (11) aside.
Illustration 6 g01449356
Remove clips (12). Disconnect harness assembly (13). Remove clips (14).
Illustration 7 g01449384
Disconnect tube assemblies (16). Remove clip (15).
Illustration 8 g01449385
Disconnect hose assembly (17) from the rear of the pump drive.
Illustration 9 g01449386
Disconnect elbow (18) from the bottom of the pump drive.
Illustration 10 g01449387
Remove clips (19) and position the clips aside.
Illustration 11 g01449388
Disconnect hose assemblies (20). Use two people in order to remove block (21).
Illustration 12 g01449389
Disconnect tube assembly (22).
Illustration 13 g01449390
Remove clip (23).
Illustration 14 g01449392
Disconnect hose assemblies (25). Remove bracket (24).
Illustration 15 g01449393
Disconnect hose assemblies (26).
Illustration 16 g01449394
Disconnect hose assemblies (27).
Illustration 17 g01449395
Disconnect hose assemblies (28).
Illustration 18 g01449396
Loosen the clamps in order to slide hose (30) over tube (32). Disconnect hose assembly (31). Remove elbow (29).
Illustration 19 g01449397
Remove bolts (34). Remove clamp (33). Repeat for the other side.
Illustration 20 g01449399
Attach Tooling (A), Tooling (B), Tooling (C), Tooling (D), Tooling (E), and a suitable lifting device to pump drive (35). The weight of pump drive (35) is approximately 1723 kg (3800 lb).
Attach Tooling (C) and Tooling (D) to the engine. Lift up on the engine and pump drive (35) in order to lift pump drive (35) from the cradle. Remove the flywheel bolts. Rotate the pump drive (35) clockwise in order to remove pump drive (35).