3727613 COVER AS-SOUND SUPPRESSION Caterpillar parts
330D L, 336D, 336D L, 336D2, 336D2 L, 340D L, 340D2 L
Rating:
Alternative (cross code) number:
CA3727613
372-7613
3727613
CA3727613
372-7613
3727613
Weight: 40 pounds 18 kg.
EXCAVATOR, MOBILE HYD POWER UNIT,
Compatible equipment models: 3727613:
Number on catalog scheme:
38
For full view, you need register
Information:
Removal Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Personal injury can result from parts and/or covers under spring pressure.Spring force will be released when covers are removed.Be prepared to hold spring loaded covers as the bolts are loosened.
Personal injury or death can occur from not following the proper procedure or the recommended tooling.To prevent the possibility of injury or death, follow the established procedure using the recommended tooling.
Before you remove the air intake shutoff, pull the trip knob on the air intake shutoff or press the emergency stop button in order to release the blade latch. If the blade latch is released after the air intake shutoff is removed, serious personal injury can result.
Manually release the air shutoff. Pull or press in order to release the knob on the air shutoff. Ensure that the indicator on the air shutoff points straight down to the "OFF" position. If the air shutoff did not trip, refer to Troubleshooting, "Air Shutoff System".
Illustration 1 g01303618
Disconnect tube assembly (1) from air shutoff (4).
Disconnect air inlet hose (5) by loosening bolts (2) from adapter (3) on air shutoff (4).
Remove bolts (6) and the washers that mount air shutoff (4) to the intake manifold.
Remove air shutoff (4) and remove the gasket. Note: Inspect the lines of the air intake for debris.Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 2 g01303618
Install a new gasket and air shutoff (4) to the intake manifold. Install bolts (6) and the washers and tighten bolts (6) to a torque of 25 6 N m (18 4 lb ft).
Reconnect air inlet hose (5). Install bolts (2) to adapter (3) and tighten bolts (2) to a torque of 25 6 N m (18 4 lb ft).
Reconnect tube assembly (1) to air shutoff (4).
Reset the indicator on the air shutoff. Ensure that the arrow on the indicator is pointing straight up to the "OPEN" position.
Test air shutoff (4) for proper operation and refer to Operation And Maintenance Manual, "Air Shutoff".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Personal injury can result from parts and/or covers under spring pressure.Spring force will be released when covers are removed.Be prepared to hold spring loaded covers as the bolts are loosened.
Personal injury or death can occur from not following the proper procedure or the recommended tooling.To prevent the possibility of injury or death, follow the established procedure using the recommended tooling.
Before you remove the air intake shutoff, pull the trip knob on the air intake shutoff or press the emergency stop button in order to release the blade latch. If the blade latch is released after the air intake shutoff is removed, serious personal injury can result.
Manually release the air shutoff. Pull or press in order to release the knob on the air shutoff. Ensure that the indicator on the air shutoff points straight down to the "OFF" position. If the air shutoff did not trip, refer to Troubleshooting, "Air Shutoff System".
Illustration 1 g01303618
Disconnect tube assembly (1) from air shutoff (4).
Disconnect air inlet hose (5) by loosening bolts (2) from adapter (3) on air shutoff (4).
Remove bolts (6) and the washers that mount air shutoff (4) to the intake manifold.
Remove air shutoff (4) and remove the gasket. Note: Inspect the lines of the air intake for debris.Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 2 g01303618
Install a new gasket and air shutoff (4) to the intake manifold. Install bolts (6) and the washers and tighten bolts (6) to a torque of 25 6 N m (18 4 lb ft).
Reconnect air inlet hose (5). Install bolts (2) to adapter (3) and tighten bolts (2) to a torque of 25 6 N m (18 4 lb ft).
Reconnect tube assembly (1) to air shutoff (4).
Reset the indicator on the air shutoff. Ensure that the arrow on the indicator is pointing straight up to the "OPEN" position.
Test air shutoff (4) for proper operation and refer to Operation And Maintenance Manual, "Air Shutoff".
Caterpillar parts catalog:
Parts cover Caterpillar catalog:
3301423
COVER AS-SOUND SUPPRESSION
330D, 330D L, 330D MH, 336D, 336D L, 336D LN, 340D L
330D, 330D L, 330D MH, 336D, 336D L, 336D LN, 340D L
120G, 120H, 120K, 120K 2, 120M, 120M 2, 12G, 12H, 12K, 12M, 130G, 135H, 1390, 140G, 140H, 140K, 140K 2, 143H, 14H, 160G, 160H, 160K, 163H, 16H, 215, 215B, 2384C, 2484C, 24H, 24M, 2590, 30/30, 305.5, 3...
12H, 140M, 140M 2, 160M, 160M 2, 2290, 2390, 2391, 2491, 2590, 330C, 330C FM, 330C L, 330C MH, 330D, 330D FM, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 336D2, 336D2 L, 340D L, 340D2 L, 511, 521...
2290, 2390, 2391, 2491, 2590, 330C, 330C FM, 330C L, 330C MH, 330D, 330D FM, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 336D2, 336D2 L, 340D L, 340D2 L, 511, 521, 521B, 522, 522B, 532, 541, 541 ...
2290, 2390, 2391, 2491, 2590, 330C, 330C L, 330D, 330D FM, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 336D2, 336D2 L, 340D L, 340D2 L, 511, 521, 521B, 522, 522B, 532, 541, 541 2, 551, 552, 552 2...
5I8799
COVER
311, 311B, 312, 312B, 312B L, 315, 315B, 315B FM L, 315B L, 317, 317B LN, 318B, 330D, 330D FM, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 336D2, 336D2 L, 336E, 336E HVG, 336E L, 336E LN, 340D L,...
311, 311B, 312, 312B, 312B L, 315, 315B, 315B FM L, 315B L, 317, 317B LN, 318B, 330D, 330D FM, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 336D2, 336D2 L, 336E, 336E HVG, 336E L, 336E LN, 340D L,...
307C, 307D, 311C, 311D LRR, 311F LRR, 312C L, 312D, 312D L, 312D2, 312D2 GC, 313D, 313D2, 315C, 315D L, 318C, 318D L, 318D2 L, 319D L, 320C, 320C FM, 320C L, 320D, 320D FM, 320D GC, 320D L, 320D LN, 3...
312D, 320B, 320C, 323D LN, 323D SA, 323E L, 325, 325 L, 325 LN, 325B, 325B L, 325C, 325D, 325D L, 325D MH, 328D LCR, 329D, 329D L, 329D LN, 329E, 329E L, 329E LN, 330, 330 FM L, 330 L, 330B L, 330C, 3...
325C, 328D LCR, 330C, 330C FM, 330C L, 330C MH, 330D, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN
2561897
COVER AS
330D, 330D FM, 330D L, 330D MH, 336D, 336D L, M330D
330D, 330D FM, 330D L, 330D MH, 336D, 336D L, M330D
3049882
COVER-MANIFOLD
SR118
SR118
3049880
COVER AS-VALVE
SR118
SR118
3281914
COVER-MOTOR
CTV15
CTV15
3448820
COVER
CTV15, CTV20
CTV15, CTV20
1659242
COVER
330C, 330D L, 330D MH, 345B II, 345B II MH, 345C, 345C L, 345C MH, 345D, 345D L, 365B, 365B II, 365B L, 365C, 365C L, 365C L MH, 374F L, W345B II, W345C MH
330C, 330D L, 330D MH, 345B II, 345B II MH, 345C, 345C L, 345C MH, 345D, 345D L, 365B, 365B II, 365B L, 365C, 365C L, 365C L MH, 374F L, W345B II, W345C MH
330, 345B, 345B II, 345B L, 345C, 345C L, 350, 365B, 365B II, 365B L, 365C, 365C L, 365C L MH
3273149
COVER AS-TANK
365C, 365C L, 365C L MH, 374D L
365C, 365C L, 365C L MH, 374D L
2363662
COVER
365C, 365C L, 365C L MH, 374D L
365C, 365C L, 365C L MH, 374D L
2363655
COVER AS
365C, 365C L, 365C L MH
365C, 365C L, 365C L MH
3753079
COVER AS
330D L, 336D, 336D L, 336D LN, 336D2, 336D2 L, 340D L, 340D2 L
330D L, 336D, 336D L, 336D LN, 336D2, 336D2 L, 340D L, 340D2 L
3744884
COVER AS
330D L, 336D, 336D L, 336D2, 336D2 L, 340D L, 340D2 L
330D L, 336D, 336D L, 336D2, 336D2 L, 340D L, 340D2 L