3787883 COVER GP-CONSOLE Caterpillar parts
D6T XL
Rating:
Alternative (cross code) number:
CA3787883
378-7883
3787883
CA3787883
378-7883
3787883
TRACK-TYPE TRACTOR,
Compatible equipment models: 3787883:
Information:
Installation Procedure
Illustration 2 g00104545
Prevent the machine from movement. Park the machine on a level surface.Attach a "Do Not Operate" warning tag to the start switch before you service the equipment. These warning tags (Special Instruction, SEHS7332) are available from your Caterpillar dealer.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 3 g03337347
(4) 230-0458 Support As (5) 230-0460 Support As (13) 8T-4223 Hard Washer (14) 8T-4910 Bolt (16) 8T-7971 Hard Washer
Secure two supports (4) and (5) to the existing blocks welded to stick using four bolts (14) and four washers (13) .
Illustration 4 g03337352
(1) 6C-6760 Manifold (7) 247-9376 Tube As (8) 250-1440 Adapter As (10) 6V-8398 O-Ring Seal
Assemble adapter (8) and manifold (1) to tube assembly (7) using one O-ring (10) to seal.
Illustration 5 g03337360
(1) 6C-6760 Manifold (2) 202-7001 Clip (7) 247-9376 Tube As (10) 6V-8398 O-Ring Seal (11) 8T-4121 Hard Washer (12) 8T-4139 Bolt (13) 8T-4223 Hard Washer (15) 8T-6466 Bolt
Secure assembled manifold (1) to the existing support. Use bolts (15), and washers (11) .
Secure the length of tube assembly (7) to supports (4), and (5). Use four clips (2), four bolts (12), and four washers (13) .
Illustration 6 g03337365
(3) 204-2281 Cable Strap (9) 253-6566 Hose As
Attach hose assembly (9) to tube assembly (7) using one O-ring (10) to seal.
Repeat step 1 through step 5 for the medium-pressure stick line on the left-hand side.
Tighten all hardware and fittings to proper torque unless otherwise specified. Refer to Specifications, SENR3130, "Torque Specifications".
Illustration 7 g00687600
Personal injury or death can result from escaping fluid under pressure.Escaping fluid under pressure, even a very small pin-hole size leak, can penetrate body tissue, causing serious injury, and possible death.Always use a board or cardboard when checking for a leak.Do not check for pin hole leaks in pump or motor hoses during a steer stall condition. If fluid is injected into your skin, it must be treated by a doctor familiar with this type of injury immediately.
Inspect the fittings for hydraulic leaks.
Illustration 2 g00104545
Prevent the machine from movement. Park the machine on a level surface.Attach a "Do Not Operate" warning tag to the start switch before you service the equipment. These warning tags (Special Instruction, SEHS7332) are available from your Caterpillar dealer.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 3 g03337347
(4) 230-0458 Support As (5) 230-0460 Support As (13) 8T-4223 Hard Washer (14) 8T-4910 Bolt (16) 8T-7971 Hard Washer
Secure two supports (4) and (5) to the existing blocks welded to stick using four bolts (14) and four washers (13) .
Illustration 4 g03337352
(1) 6C-6760 Manifold (7) 247-9376 Tube As (8) 250-1440 Adapter As (10) 6V-8398 O-Ring Seal
Assemble adapter (8) and manifold (1) to tube assembly (7) using one O-ring (10) to seal.
Illustration 5 g03337360
(1) 6C-6760 Manifold (2) 202-7001 Clip (7) 247-9376 Tube As (10) 6V-8398 O-Ring Seal (11) 8T-4121 Hard Washer (12) 8T-4139 Bolt (13) 8T-4223 Hard Washer (15) 8T-6466 Bolt
Secure assembled manifold (1) to the existing support. Use bolts (15), and washers (11) .
Secure the length of tube assembly (7) to supports (4), and (5). Use four clips (2), four bolts (12), and four washers (13) .
Illustration 6 g03337365
(3) 204-2281 Cable Strap (9) 253-6566 Hose As
Attach hose assembly (9) to tube assembly (7) using one O-ring (10) to seal.
Repeat step 1 through step 5 for the medium-pressure stick line on the left-hand side.
Tighten all hardware and fittings to proper torque unless otherwise specified. Refer to Specifications, SENR3130, "Torque Specifications".
Illustration 7 g00687600
Personal injury or death can result from escaping fluid under pressure.Escaping fluid under pressure, even a very small pin-hole size leak, can penetrate body tissue, causing serious injury, and possible death.Always use a board or cardboard when checking for a leak.Do not check for pin hole leaks in pump or motor hoses during a steer stall condition. If fluid is injected into your skin, it must be treated by a doctor familiar with this type of injury immediately.
Inspect the fittings for hydraulic leaks.
Caterpillar SIS machinery equipment:
Caterpillar parts catalog:
Parts cover Caterpillar catalog:
3783869
COVER GP-CONSOLE
D6T LGP, D6T XL
D6T LGP, D6T XL
3783767
COVER GP-CONSOLE
D6T LGP, D6T XL
D6T LGP, D6T XL
3783766
COVER GP-CONSOLE
D6T LGP, D6T XL
D6T LGP, D6T XL
3253728
COVER GP-CONSOLE
D6T LGP, D6T XL
D6T LGP, D6T XL
3783813
COVER GP-GUARD
D6T XL
D6T XL
3562164
COVER GP-PROTECTION
D6T LGP, D6T LGPPAT, D6T XL, D7E, D7E LGP
D6T LGP, D6T LGPPAT, D6T XL, D7E, D7E LGP
2488115
COVER GP-PLATFORM
587T, PL87
587T, PL87