COVER AS-REAR 3789479 - Caterpillar

Hot oil and hot components can cause personal injury. Do not allow hot oil or hot components to contact skin.
Operate the machine until the oil is warm.Park the machine on a level surface with front wheels straight ahead. Lower all attachments to the ground. Apply a slight downward pressure to the attachments. Center the articulation of the machine and install the frame lock pin. The frame lock pin must move freely in the frame. Move the front wheels to vertical and install the wheel lean bolt. Engage the parking brake. Stop the engine.
Illustration 1 g00704644
The hydraulic tank sight gauge is positioned on the left side of the machine.
Illustration 2 g00110368
Maintain the oil level above the "ADD" mark in hydraulic tank sight gauge (1) .
Illustration 3 g00110369
If necessary, add oil. Slowly loosen the filler cap in order to relieve the tank pressure. Remove filler cap (2). Add oil through the filler tube.
Clean the filler cap and install the filler cap.