COVER AS-PROTECTION 3820567 - Caterpillar

Feed wire harness (10) through hole (X). Connect two clips (12) and position the head lamps inside the fender assembly. Install two bolts (9) and the hard washers that hold the head lamps in position.
Illustration 44 g00652206
Position a suitable lifting sling on catwalk assembly (8). Secure the suitable lifting sling to a hoist. Lift the catwalk assembly into position, as shown. The weight of the catwalk assembly is 84 kg (185 lb). Install the mounting bolts and the hard washers that hold the catwalk assembly to the cab.
Illustration 45 g00652205
Position brace (6) on the fender assembly and on the catwalk assembly, as shown. Install two bolts (7) and the hard washers that hold brace (6) in place.
Illustration 46 g00652204
Position two heater hose assemblies (2), as shown. Connect quick coupler (4). Connect quick coupler (5) to the air dryer.
Illustration 47 g00652203
Feed two heater hose assemblies (2) through clip (3). Connect two heater hose assemblies (2) to the heater core and tighten the two hose clamps.
Illustration 48 g00652201
Open two valves (1) at the water pump.
Fill the steering tank. The capacity of the steering tank is 40 L (11 US gal). Refer to Operation and Maintenance Manual, "Steering System Oil - Change".
Fill the radiator. Refer to Operation and Maintenance Manual, "Cooling System Coolant (ELC) - Change".Final Check
Reference Refer to the Service Manuals and the Operation and Maintenance Manual in order to correct any system problems.Reference Refer to the Service Manuals and the Operation and Maintenance Manual in order to locate and service the systems listed in the list below.After eight hours of continuous operation, replace the cleanout filter elements with standard filter elements for the systems that follow.
Parking brake filter
Transmission filter
Steering system filter
Torque converter charging oil filter
Before the engine is started, make sure that all the hydraulic systems are full. Also, ensure that all pump case drains are full.
Check that the following system pressures are set correctly.
Table 9
Item     Yes     No    
Pump            
Brake            
Steering Pressure            
Transmission            
Torque Converter            
Differential            
Check the machine lights.
Table 10
Lights     Yes     No    
Operational            
Cab and Dash            
Check the controls in the cab.
Table 11
Test     Yes     No    
Cab door opens            
Cab door closes            
Horn Functions            
Window Wipers function            
Seat Belt operates            
Fan Switch operates            
Air Conditioner operates            
EMS Test Light operates            
Hour Meter operates            
Hoist Implement operates            
Steering operates            
Steering Column operates            
Parking Brake Functions            
Check if all fluid