COVER 3865877 - Caterpillar

Use screed float switch (9) to place the screed in the FLOAT position. When the screed is in the FLOAT position, an LED next to the screed float switch will illuminate. Allow the tow arms to rest on screed service locks (6).
Press right screed extend switch (8). Release the switch when the right screed extender is fully extended.
Press left screed extend switch (7). Release the switch when the left screed extender is fully extended.
Illustration 5 g03816152
Press the auger raise switch (10). Fully rise the augers.
Illustration 6 g03816164
Press rpm decrease switch (12) for the throttle control once to operate the engine in low idle.
Illustration 7 g03788922
Shut off the engine. Either place machine power switch (13) in the OFF position or press and hold push to start switch (11) for 3 seconds. An LED next to the push to start switch will flash when the engine is in shutdown